Advertisement
1. Log in to the machine as the machine administrator from Web Image Monitor.
Logging in to the Machine as an Administrator
When custom-privileges administrators are registered, you can log in to the
machine as a custom-privileges administrator with the Data Management privilege
as well.
Logging in to the Machine as a Custom-Privileges Administrator
2. Click [Configuration] on the [Device Management] menu.
3. On the "Configuration" screen, click [System] in the "Device Settings"
category.
4. Under "General Settings", select [Active] of "Job Execution Restrictions
When Log Limit is Reached", and then click [OK].
5. Log out of the machine, and then exit the Web browser.
Section Top
Copyright © 2023
Confirming Log Files | Specifying Menu Protect
Page Top
Advertisement
