Inner Display Programming; Presentation - Pentair E-Box INTELLIPOOL Installation And Operation Manual

5.2

Inner Display Programming

5.2.1

Presentation

The remote Inner Display informs of all parameters (updated every 15 minutes) of water quality
and comfort (temperatures, UV).
Intended for inner use, pre-programmed alerts make it possible at a glance to check the chemical
balance of the water without making the tedious analyses at the edge of the basin.
Moving the display may cause signal loss. If there is more than 1 hour out of reach, the
information is all erased.
The remote display can be used:
• put it on its tripod;
• attach to the wall (after testing the range of the signal).
1 Air/water temperature display
Air/water temperature [
2 pH trend
pH trend [ → Page 68]
3 Conductivity Trend
Conductivity Trend [
4 RedOx Trend
RedOx Trend [
→
5 Mode in progress
Alarm/calibration/radio
Mode in progress [
Ref. SB-CU-IMP-058EBA / A - 11.05.2023
Installation and Operation Guide Version E-Box INTELLIPOOL - Programming
1
2
3
4
5
6
7
8
→ Page 66]
Page 69]
→
Page 71]
Page 72]
→
12
11
10
9
7 Out-of-water probes
Out-of-water probes [
8 Filter wash alert
Wash filter to do
9 Navigation keys
Navigation keys [
10 Filtration Status
On = Running
11 Battery level
Remote radio/display relay
Battery level [ Page 79]
→
→ Page 78]
Page 66]
→
65 / 102