Pentair E-Box INTELLIPOOL Installation And Operation Manual page 53

Pool lighting independent connection
1. Connect the additional lighting according to the diagram below, terminal blocks 13-14
(230 V / 10 A Max).
2. In the menu "Pool Properties > Menu Installation 4X Extension", see Menu installation 4X
Extension [ Page 47], select the output AUX 4 "AUX" and customise the name if necessary.
→
Lighting will be active when scheduling or when the switch is operated through the
application.
Connection of an electric heater
1. Connect the heater according to the choice of the diagram below (greater than or less than
10 A).
2. In the menu "Pool Properties > Menu Installation 4X Extension", see Menu installation 4X
Extension [ → Page 47], select the output "Heater" and customise the name if necessary.
Ref. SB-CU-IMP-058EBA / A - 11.05.2023
Installation and Operation Guide Version E-Box INTELLIPOOL - Installation
53 / 102