Programming; Display - Pentair FLECK 4600-SXT Installer Manual

6.

Programming

6.1.

Display

1. Service icon
2. Error /
Information icon
3. Parameter display
Ref. MKT-IM-028 / A - 03.07.2018
→ Appears in service mode;
→ Flashes if a regeneration cycle has been queued.
→ Appears in case of error, see page 82, or in diagnostic mode, see
page 58.
Master programming and diagnostic modes:
→ C: Unit capacity;
→ CD: Current day;
→ CT: Regeneration control type;
→ DF: Display format;
→ Dn, n=1 to 7: Day of week;
→ DO: Days override;
→ FM: Flow meter;
→ FR: Current flow rate;
→ H: Feedwater hardness;
→ HR: Hours in service;
→ K: Meter pulse;
→ NT: Number of tanks;
→ PF: Peak flow rate;
→ RC: Reserve capacity;
→ RS: Reserve selection;
→ RT: Regeneration time;
→ SF: Safety factor;
→ SV: Software version;
→ TD: Time of day;
→ TS: Tank in service;
→ VT: Regeneration mode;
→ VU: Volume used;
→ VT: Regeneration mode.
Regeneration cycles:
→ B1: First backwash (for dF2b regeneration mode);
→ B2: Second backwash (for dF2b regeneration mode);
→ BD: Brine draw;
→ BF: Brine fill;
→ BW: Backwash;
→ RR: Rapid rinse.
Installer Manual Fleck 4600 SXT - Programming
47 / 98