Table of Contents
Advertisement
Installation and Operation Guide Version E-Box INTELLIPOOL - Programming
ð
The procedure is complete.
ð
Procedure
ð Check the presence of a pH 4.0 solution in contact with the probe for the duration of the
procedure.
ð The probe is no longer functional (to be replaced).
5.2.6.3
Radio mode
Info
The elements making up a set INTELLIPOOL are paired automatically by a unique radio
code
which
(neighbourhood...).
This RADIO mode allows you to add to an existing INTELLIPOOL:
• a no. 2 Radio Relay in order to overcome difficult radio range situations (relief, very long
distances, etc.);
• an Inner Display no. 2 in order to take advantage of a second source of reading of the
information of your pool.
5.2.7
Audible Alarm Status
Sound off
Sound on
5.2.8
Out-of-water probes
78 / 102
prevents
any
risk
On the Inner Display, an audible alert for the various alarms
as well as a discreet beep are available.
This pictogram illustrates the activation and deactivation of
the sound accessible by the switch located on the back of the
Inner Display.
pHand RedOx (ORP) probes should always be soaked in water
to avoid drying out.
Normally, probes are always in the water. For any reason, if
air is present in the piping, check the presence of air intake as
well as the proper sealing of the hydraulic circuit.
of
interference
with
Ref. SB-CU-IMP-058EBA / A - 11.05.2023
other
INTELLIPOOL
Advertisement
Table of Contents
