Table of Contents
Advertisement
Installation and Operation Guide Version E-Box INTELLIPOOL - Installation
Positioning
Info
The Radio Relay should be placed high up (on a wall or pole for example), away from any
metal object (iron fence, zinc gutter).
1. Use the compass to orient the Radio Relay to the south thanks to the reference provided for
this purpose.
2. Place the Radio Relay according to one of these configurations:
ð directly into the earth (planter).
ð between two pots on a window edge.
ð screwed on a stake or on a wall using its support.
ð tightened on a stake using its support and tightening flanges.
Info
Always replace the 4 batteries at the same time and with professional batteries.
If the Radio Relay falls to the ground, check that it has not suffered any damage and
reinstall it, taking care to fit the two parts together.
Info
The display of the data can be refreshed by positioning the switch on "CALIB" and then
returning to "ON" (on the back of the display). This manipulation makes it possible to
visualize, after 10 seconds, the strength of the radio signal at each Radio Relay
positioning test.
Info
In case of very great distance between the pool and the house, it is possible to add one or
two Radio Relays (option).
See Adding a Radio Relay and/or Inner Display [
32 / 102
calib
alarm
on
Or
→
Page 80].
Ref. SB-CU-IMP-058EBA / A - 11.05.2023
Advertisement
Table of Contents
