Related Manuals for Pentair E-Box MAESTRO
Summary of Contents for Pentair E-Box MAESTRO
- Page 1 INSTALLATION AND OPERATION GUIDE Version E-Box MAESTRO IMPORTANT SAFETY INSTRUCTIONS Read and follow all the instructions Keep these instructions WWW.PENTAIRPOOLEUROPE.COM...
-
Page 2: Table Of Contents
Installation and Operation Guide Version E-Box MAESTRO - Table of Contents Table of Contents General.................... Scope of this document................Version Management .................. Manufacturer identification (ID), product ........... Technical assistance procedure..............Copyright and Trademarks ................. Limitation of Liability .................. Declaration of conformity ................ - Page 3 Installation and Operation Guide Version E-Box MAESTRO - Table of Contents Tools Required for Installation ..............29 Internet Relay....................30 Inner Display ....................31 Radio Relay....................32 E-Box......................34 4.8.1 Wall mounting ..................... 4.8.2 Connections......................4.8.3 Connecting the “Single Speed” filter pump............
- Page 4 Installation and Operation Guide Version E-Box MAESTRO - Table of Contents 5.2.9 Battery level ......................5.2.10 Radio Signal Strength ..................Operations ..................89 Commissioning ................... 89 Adding a Radio Relay and/or Inner Display ..........89 Re-learning the Original Inner Display............91 Operation of the Internet Relay ..............
-
Page 5: General
Installation and Operation Guide Version E-Box MAESTRO - General General Scope of this document This document contains the information necessary for proper use of the product. It informs the user in order to guarantee the proper execution of the installation, use and maintenance procedures. -
Page 6: Copyright And Trademarks
Installation and Operation Guide Version E-Box MAESTRO - General Copyright and Trademarks All trademarks and logos Pentair are the property of Pentair. The brands, trademarks and logos of third parties are the property of their respective owners. © 2023 Pentair. All rights reserved. -
Page 7: Declaration Of Conformity
Installation and Operation Guide Version E-Box MAESTRO - General Declaration of conformity Guidelines – Harmonised standards Pentair International LLC - Avenue de Sevelin 20 - 1004 Lausanne - Suisse We declare that the product meets the guidelines and take responsibility for it: • 2014/53/EU. -
Page 8: Pentair Scan Application
Installation and Operation Guide Version E-Box MAESTRO - General Pentair Scan Application The mobile application Pentair Scan is an ideal tool for the daily work of the maintenance technician. The simple reading of the identification label present on the product, with a smart phone, gives instant access to all its information. -
Page 9: Security
Installation and Operation Guide Version E-Box MAESTRO - Security Security Definition of safety pictograms DANGER This combination of symbol and keyword indicates an imminently hazardous situation that will result in serious or fatal injury if not avoided. WARNING This combination of symbol and keyword indicates a potentially hazardous situation that can result in serious or fatal injury if not avoided. -
Page 10: Risks
Installation and Operation Guide Version E-Box MAESTRO - Security Risks All safety and protection instructions contained in this document must be followed in order to avoid injury, property damage or environmental, irremediable or temporary pollution. Likewise, all other regulations and measures for accident prevention and environmental... - Page 11 Installation and Operation Guide Version E-Box MAESTRO - Security WARNING Water temperatures above 37.7°C are a health hazard! Prolonged immersion in hot water can cause hyperthermia. Taking alcohol, drugs or medication is a factor aggravating the risk of hyperthermia in hot water baths and spas.
-
Page 12: Hardware
Installation and Operation Guide Version E-Box MAESTRO - Security Mandatory This installation and operation guide contains important information about the installation, operation and safety of this product! This guide should be provided to the owner and / or operator of this product. - Page 13 Installation and Operation Guide Version E-Box MAESTRO - Security Prohibition Do not mix sodium hypochlorite and muriatic acid (hydrocloric acid)! Do not mix out of water, chlorinated product and pH fix! Info Devices intended for any other use than use by a one person family, may require...
-
Page 14: Description
Installation and Operation Guide Version E-Box MAESTRO - Description Description Technical specifications E-Box Protection rating IP44 System pre-wiring SB-PF-ENS-0020 Operating voltage 230V Input power supply frequency 50 Hz Power 14 kW max Number of inputs Number of outputs 9x (230V/16A max) 4x (12V/16A max) -
Page 15: Congestion Diagram
Installation and Operation Guide Version E-Box MAESTRO - Description • Maximum relative humidity of 80% for temperatures up to 31°C decreasing in a linear manner to 50% relative humidity at 40°C; • Mains power supply voltage variations of ± 10% of the nominal voltage. - Page 16 Installation and Operation Guide Version E-Box MAESTRO - Description Control Centre and Probe Unit (both cases have the same dimensions) Control Center Probe Unit 16 / 110 Ref. SB-CU-IMP-062EBA / A - 11.05.2023...
-
Page 17: Product Description
Installation and Operation Guide Version E-Box MAESTRO - Description Product Description 3.3.1 General operation The diagram below describes an example of a typical installation of a fully automated and remotely controlled swimming pool. Refer to the relevant item for more information about it. -
Page 18: The E-Box
Your E-Box MAESTRO contains a 4X Extension Unit module (this allows the control of complementary and additional equipment) as well as a Speed-FC module (this allows the control of the variable speed pumps). -
Page 19: Control Centre
Installation and Operation Guide Version E-Box MAESTRO - Description 3.3.3 Control Centre The Control Centre automatically controls and calculates the operating time of the equipment connected to the system, it is the brain of the installation. It receives the orders transmitted by the remote control device or by the internet and communicates with the device concerned. -
Page 20: Probe Unit
Installation and Operation Guide Version E-Box MAESTRO - Description 3.3.4 Probe Unit The device is equipped with five probes that allow it to measure the properties and values of the water. The information collected is then transmitted to the Control Centre to refine the adjustment of the water regulation. -
Page 21: Inner Display
Installation and Operation Guide Version E-Box MAESTRO - Description Radio antenna Connector for Ethernet cable Power supply connector This relay, once connected to your internet box (see Internet Relay [ → Page 30]), created a radio network allowing it to send and receive information from your installation. -
Page 22: Radio Relay
Installation and Operation Guide Version E-Box MAESTRO - Description 3.3.7 Radio Relay The Radio Relay is used to relay radio waves between the technical room and the internet box through the Internet Relay. It must be placed outside, for example in the garden halfway between the technical room and the house. -
Page 23: Extension Unit
Installation and Operation Guide Version E-Box MAESTRO - Description 3.3.8 4X Extension Unit The 4X Extension module is an input and output extension module installed in your E-Box. It will allow you to connect more equipment to your system. The module consists of 4 IN inputs, 2 AL alarm inputs and 4 AUX outputs. - Page 24 Installation and Operation Guide Version E-Box MAESTRO - Description • Speck EcoTouch, EcoMotion; • Hayward VSTD and Zodiac Flo Pro VS. Or an Invertek Drives/Optidrive frequency inverter. 2x16 screen showing current speed Customisable surfaces for noting the attributing of speed...
-
Page 25: Installation
Installation and Operation Guide Version E-Box MAESTRO - Installation Installation Warnings CAUTION Risk of injury due to electric shock or pressurised elements! It is strictly forbidden for any unqualified personnel to access the internal components of the system in order to carry out any technical work whatsoever. -
Page 26: Package Contents
Installation and Operation Guide Version E-Box MAESTRO - Installation Package contents • 1 E-Box • 5 Cables for the connections of the MAESTRO in the E-Box • Cable glands set for installation of cables in the E-Box • 1 Control Centre MAESTRO •... -
Page 27: Accessories Provided Depending On The Options Chosen
Installation and Operation Guide Version E-Box MAESTRO - Installation Accessories provided depending on the options chosen 4.3.1 Analysis chamber Supplied with the installation kit, it must be installed as close as possible to the Probe Unit box, and receives the measurement probes provided: RedOx, pH and conductivity. -
Page 28: Pool Water Treatment Liquid Solution Injection Metering Pump
Installation and Operation Guide Version E-Box MAESTRO - Installation 4.3.2 Pool water treatment liquid solution injection metering pump The solution injection metering pump is supplied with the installation kit, it must be installed separately from the electrical box, integral with the wall of the technical room, in accordance with its instructions. -
Page 29: Salt Electrolysis Cell For Chlorine Production 13 Or 27 G/H (Optional)
Installation and Operation Guide Version E-Box MAESTRO - Installation 4.3.3 Salt electrolysis cell for chlorine production 13 or 27 g/h (optional) Connection cable This equipment is intended for the production of chlorine from swimming pool water. The salt electrolysis cell is provided as an option with the installation kit, it must be installed bypass or online (max accepted flow rate of 18 m... -
Page 30: Internet Relay
Installation and Operation Guide Version E-Box MAESTRO - Installation Internet Relay Info Install and connect the Internet Relay first. The pairing of the various devices will thus be automatic. 1. Connect the provided Ethernet cable (5) to the Internet Relay (1) and your internet modem (4). -
Page 31: Inner Display
Installation and Operation Guide Version E-Box MAESTRO - Installation Inner Display Caution - material Do not expose the appliance to sun (UV) or rain. Risk of irreversible damage to the interior display. The display is intended for inner use. 1. Install 4 AA batteries indoors. -
Page 32: Radio Relay
Installation and Operation Guide Version E-Box MAESTRO - Installation Radio Relay Start-up Info Switching on a Radio Relay or Inner Display triggers the recognition/machine learning of a radio code. 1. Remove the the tub by pulling on the tab. 2. Place the jumper in the OFF position to avoid disturbing the outdoor temperature and UV index values of Radio Relay K no. - Page 33 Installation and Operation Guide Version E-Box MAESTRO - Installation Positioning Info The Radio Relay should be placed high up (on a wall or pole for example), away from any metal object (iron fence, zinc gutter). 1. Use the compass to orient the Radio Relay to the south thanks to the reference provided for this purpose.
-
Page 34: E-Box
Installation and Operation Guide Version E-Box MAESTRO - Installation E-Box 4.8.1 Wall mounting Caution - material The device must not be installed outdoors, preferring instead a technical room inaccessible to children. • Ensure that the bracket on which the appliance is installed can support a load of 10 kg. -
Page 35: Connections
Installation and Operation Guide Version E-Box MAESTRO - Installation Info The quick-connect cables are connected to the bottom of theE-Box (7). Install the cable ducts provided according to the diameter and number of cables used. The cable ducts prevent moisture or acid vapour from entering the device. Never leave an empty hole unused without protection. - Page 36 Installation and Operation Guide Version E-Box MAESTRO - Installation 230V socket INTELLICHLOR Cell connection MAESTRO Power supply connector MAESTRO Control connector MAESTRO Data connector MAESTRO Robot Socket 230V Information connector Cable routing Main protection with 30 mA differentials Single speed pump thermal protection...
- Page 37 Installation and Operation Guide Version E-Box MAESTRO - Installation 4X Extension Unit [ Page 48] Speed-FC [ Page 56] → → 1. High voltage connection (230V) 2. Low voltage connection (12/24V) Terminal block 1: High voltage Terminal block 2: Low voltage connection (230V) [ Page 37]...
- Page 38 Installation and Operation Guide Version E-Box MAESTRO - Installation N-L1 E-Box Main Power Supply (230V) Connection of the Heat Pump Power Supply (230V) Variable Speed Pump Power Supply Connection (230V) Pool Automatic Shutter Power Supply Connection (230V) Connection of the Single Speed Filter Pump Power Supply (230V)
-
Page 39: Connecting The "Single Speed" Filter Pump
Connection of the temperature sensor when solar heating is used 51-52 Power +/- output for the connection of a filling solenoid valve (24 V) 53-54 DATA +/- output for equipment connection Pentair with the DATA function 55-62 Connection of swimming pool projectors (12 V/50 W unit) Prohibition Never supply voltage (Neutral + Phase) to IN, AL inputs and AUX outputs In order to operate the outputs correctly, it is necessary to configure them on the website. -
Page 40: Connection Of The Heat Pump Power Supply (If Installed)
Installation and Operation Guide Version E-Box MAESTRO - Installation 4.8.4 Connection of the heat pump power supply (if installed) The connection of the supply phase, the neutral and the earth must be made through the connection terminal block according to terminals 1 and 2 (for the earth connection: proceed to the connection on the dedicated terminal block). - Page 41 Installation and Operation Guide Version E-Box MAESTRO - Installation 3. Insert one dowel into each hole. 4. Install the upper screw (1) and hang the device (2) in the place provided for this purpose. 5. Secure the appliance (2) using the two bottom screws (4).
-
Page 42: Hydraulic And Electrical Installation
Installation and Operation Guide Version E-Box MAESTRO - Installation 4.9.2 Hydraulic and electrical installation The diagram below illustrates the electrical and hydraulic connections of the Probe Unit with the analysis chamber. Mandatory It is imperative to isolate the bypass by closing both valves before changing a probe. -
Page 43: Installation Of Probes
Installation and Operation Guide Version E-Box MAESTRO - Installation Install the probes in the analysis chamber The Probe Unit comes with a probe to having previously removed the lower part measure water temperature. A second (the transparent bowl) of the analysis probe (optional) can be installed to chamber. - Page 44 Installation and Operation Guide Version E-Box MAESTRO - Installation 1. Unscrew the spigots. Screw/unscrew cylinders Never push or pull the cylinders that have the cap Prohibition Prohibition of pushing or pulling the cramps. Risk of damage to probes. 2. Install the probes in the analysis chamber provided.
- Page 45 Installation and Operation Guide Version E-Box MAESTRO - Installation Installing the water temperature sensor Install the water temperature probe preferably before the pump filtration system. 1. Drill the PVC pipe (Ø50-70 mm) to make a hole with a diameter of 10 mm.
-
Page 46: Connections
Installation and Operation Guide Version E-Box MAESTRO - Installation 4.9.4 Connections 4.9.4.1 Probe Units Connections Quick connection to the Control Centre Cable feed for probes Swimming pool shutter limit switch Liquid Chlorine Pump Low Level Sensor pH Regulator Pump Low Level Sensor... - Page 47 Installation and Operation Guide Version E-Box MAESTRO - Installation 4.9.4.2 Control Centre connections Connector cable 1 connected with the E-Box Link and information cable with the Probe Unit Information contact cable Connection with the E-Box Connector cable for control link with the E-Box...
-
Page 48: Extension Unit
Installation and Operation Guide Version E-Box MAESTRO - Installation Info Only the Pentair probes are compatible and guarantee the proper functioning of the device. 4.10 4X Extension Unit 4.10.1 Menu installation 4X Extension Info The menu is only accessible through the website. See Website and Home Automation Control Application [ →... -
Page 49: Examples Of Connections Of In Inputs
Installation and Operation Guide Version E-Box MAESTRO - Installation 4.10.2 Examples of connections of IN inputs Input IN1 (terminal blocks 37-38) 1. In the menu “Pool Properties > Menu Installation 4X Extension”, see Menu installation 4X Extension [ → Page 48], select the related input “pH Tank or RedOx” and customise the name if necessary. - Page 50 Installation and Operation Guide Version E-Box MAESTRO - Installation Dry contact Normally Open or Normally Closed depending on choice: NO = Normally Open = allows filtration (closing it will immediately stop filtration) NF = Normally Closed = allows filtration (opening it will immediately stop...
-
Page 51: Aux Output Connections
Installation and Operation Guide Version E-Box MAESTRO - Installation 1 - Dry contact whose closing time will be recorded in the history (such as a water meter type filling sensor) 1a - Installation of a relay closing a switch. Use a relay compatible with the... - Page 52 Installation and Operation Guide Version E-Box MAESTRO - Installation Terminal blocks 25-26 (by dry contact) Terminal blocks 15-16 (by 230V power supply) Phase (L) Earth Neutral (N) Connecting an additional pump or apparatus >12A at 230V 1. Connect it according to the diagram below on the output AUX 3 terminal blocks 13-14.
- Page 53 Installation and Operation Guide Version E-Box MAESTRO - Installation Connecting a 3-way valve to the Control Centre (for fountain triggering...) 1. Connect the valve according to the diagram below. 2. In the menu “Pool Properties > Menu Installation 4X Extension”, see Menu installation 4X Extension [ Page 48], select the output “Aux 4”...
- Page 54 Installation and Operation Guide Version E-Box MAESTRO - Installation Pool lighting independent connection 1. Connect the additional lighting according to the diagram below, terminal blocks 15-16. 2. In the menu “Pool Properties > Menu Installation 4X Extension”, see Menu installation 4X Extension [ →...
- Page 55 Installation and Operation Guide Version E-Box MAESTRO - Installation < 10A through terminal blocks 15-16 Earth > 10A through terminal blocks 25-26 Phase (L) Earth Neutral (N) Connecting a Solar Heater 1. Connect the solar heater according to the choice of the diagram below.
-
Page 56: Speed-Fc
Installation and Operation Guide Version E-Box MAESTRO - Installation 2. In the menu “Pool Properties > Menu Installation 4X Extension”, see Menu installation 4X Extension [ → Page 48], select the output AUX 2 “Filling” and customise the name if necessary. -
Page 57: Pentair Vs2 And Vs2 M
Installation and Operation Guide Version E-Box MAESTRO - Installation +12V Phase 230V Neutral 230V BUS link Intelliflo CABLE 4.11.2 PENTAIR VS2 and VS2 m Info On the pump, set: speeds 1 < 2 < 3 < 4 • Activate the "Ext. Control Only ”(see pump manual) •... -
Page 58: Speck Eco Touch
Installation and Operation Guide Version E-Box MAESTRO - Installation • Speed cable 1: 29 • Speed cable 2: 31 • Speed cable 3: 33 • Speed cable 4: 35 Green = Data (do not use) Yellow = Data (do not use) -
Page 59: Speck 90 Eco Motion
Installation and Operation Guide Version E-Box MAESTRO - Installation 4.11.4 SPECK 90 Eco Motion Info On the pump, set: speeds N1 < N2 < N3 < N4 and N4 at 100%; "EXTERNAL = FIXED DIGITAL SPEEDS" and "SIGNAL = CONTINUOUS". Info The pump can run at a maximum speed of 5 minutes after starting up. -
Page 60: Pentair Superflo Vs
Installation and Operation Guide Version E-Box MAESTRO - Installation 4.11.5 PENTAIR SuperFlo VS Info Set the speeds V1 < V2 < V3 < V4 and V4 to 100% on the pump drive. Place dip switches 1, 2, 3, 4 ON on the pump drive. -
Page 61: Hayward Vstd
Installation and Operation Guide Version E-Box MAESTRO - Installation Common control cable: 29-31-33-35 Speed cable 1: 30 Speed Cable 2: 32 Speed Cable 3: 34 Speed Cable 4: 36 STEP 1 STEP 2 STEP 3 OVRD ICOM 4.11.6 HAYWARD VSTD Info Set the appropriate speeds 1 (Eco), 2 (Normal) and 3 (Max) on the HAYWARD pump. -
Page 62: Zodiac Flopro Vs
Installation and Operation Guide Version E-Box MAESTRO - Installation 4.11.7 ZODIAC FloPro VS Info On the pump, set: speeds 1 < 2 < 3 < 4; all running times at "0". IN bypass connections Not plugged in: For use with the ZODIAC FloPro VS. -
Page 63: Settings On Www.domotique-Piscine.eu
Installation and Operation Guide Version E-Box MAESTRO - Installation Terminal block under the user interface COMMON STEP 4 STEP 3 STEP 2 STEP 1 4.11.8 Settings on www.domotique-piscine.eu Info Once the Speed FC is connected and switched on through MAESTRO, log in to its www.domotique-piscine.eu account, select on the pool concerned Pool Properties, then... - Page 64 Installation and Operation Guide Version E-Box MAESTRO - Installation MAESTRO selects the appropriate speed according to the events (water temperature to trigger the freezing release, start-up of an equipment concerned) Shifting from Eco to Normal gear if one of these elements is...
-
Page 65: Programming
Installation and Operation Guide Version E-Box MAESTRO - Programming Programming Programming the MAESTRO Control Centre 5.1.1 Presentation Time Settings menu Setting menu [ Page 66] → Date Lighting menu Lighting menu [ Page 69] → Water temperature Filtration menu Filtration menu [ Page 69]... -
Page 66: Setting Menu
Installation and Operation Guide Version E-Box MAESTRO - Programming 5.1.1.1 Navigation keys Exhaust Go back to the previous step without considering the changes. Displacement down/decrementation Navigation down in drop-down menus or decrementation of values in numerical spaces. Displacement up/incrementation Upward navigation in drop-down menus or incrementing values in numerical spaces. - Page 67 Installation and Operation Guide Version E-Box MAESTRO - Programming Disinfectant Options: • Auto: Automatically adjust based on RedOX. • Off: Turn off the power to the electrolyser completely. • Instruction: Change the RedOx value to be reached in Auto mode (650 mV factory).
- Page 68 Installation and Operation Guide Version E-Box MAESTRO - Programming 1. Select the radio menu option with 2. Press to confirm the selection and proceed to the next parameter. Memo. Installation The menu asks to start learning on the immersed case.
-
Page 69: Lighting Menu
Installation and Operation Guide Version E-Box MAESTRO - Programming 5.1.3 Lighting menu Options: • Manual: Have access to lighting through the remote control. • Clock: Set the time slots in the Clock Setting sub-menu. • Off: Permanently turn off the lighting. -
Page 70: Aux1 Menu
Installation and Operation Guide Version E-Box MAESTRO - Programming Filtration Settings • This setting increases or decreases the filtration time to compensate for pump size and/or activity in the pool • Factory settings (editable in the Installation menu): – Turbo = +30% –... -
Page 71: History Menu
Installation and Operation Guide Version E-Box MAESTRO - Programming 5.1.6 History Menu 1. Access the secure menu history of the day MAESTRO by pressing for 4 secs. 2. Access the 4 pages of the history of the day by pressing on :... - Page 72 Installation and Operation Guide Version E-Box MAESTRO - Programming • Eco (default -30%): Decreases the filtration time (in %) from the normally calculated time. • Turbo (default +30%): Increases the filtration time (in %) of the normally calculated time. 5.1.7.3 pH installation Modification of the injection parameters of the pH regulator.
-
Page 73: Inner Display Programming
Installation and Operation Guide Version E-Box MAESTRO - Programming Inner Display Programming 5.2.1 Presentation The remote Inner Display informs of all parameters (updated every 15 minutes) of water quality and comfort (temperatures, UV). Intended for inner use, pre-programmed alerts make it possible at a glance to check the chemical balance of the water without making the tedious analyses at the edge of the basin. -
Page 74: Air/Water Temperature
Installation and Operation Guide Version E-Box MAESTRO - Programming Audible Alarm Status Radio Signal Strength On/off Radio Signal Strength [ Page 88] → Audible Alarm Status [ Page 87] → 5.2.1.1 Navigation keys Info Pressing any key stops an audible alarm. Exhaust Go back to the previous step without considering the changes. - Page 75 Installation and Operation Guide Version E-Box MAESTRO - Programming 5.2.2.1 Temperatures The Inner Display provides the temperature in °C): The air temperature accompanied by the pictogram e.g.: The air temperature is 28.5°C The water temperature accompanied by the pictogram e.g.: The water temperature is 24.0°C...
-
Page 76: Ph Trend
Installation and Operation Guide Version E-Box MAESTRO - Programming The gel pictogram related to the air temperature is displayed if the temperature measured by the Radio Relay is less than +3°C. The water temperature is 0.5°C 5.2.2.3 UV level (not guaranteed, for information only) The UV level is provided as an indication for sensitization to the skin risks of exposure to the sun between 11am and 3pm. - Page 77 Installation and Operation Guide Version E-Box MAESTRO - Programming The pH has reached alarm • the pH has reached the maximum alarm value value (factory pre-set at 6.7 can be modified through the alarm menu, see Alarm mode [ →...
-
Page 78: Conductivity Trend
Installation and Operation Guide Version E-Box MAESTRO - Programming CAUTION pH too high or too low! Skin irritation ü Ensure that: ü the cylinder has been removed from the pH probe (see Installation of probes → Page 43]) ü the pH probe was calibrated less than 6 months ago (see Calibration mode →... - Page 79 Installation and Operation Guide Version E-Box MAESTRO - Programming Unit used • g/l unit used for salt electrolysis • µS unit used without salt electrolysis The choice of the conductivity unit (μS or g/l) is made by the mode calibration/change of units (see Calibration mode →...
-
Page 80: Redox Trend
Installation and Operation Guide Version E-Box MAESTRO - Programming 5.2.5 RedOx Trend RedOx Trend (Updated • the RedOx every 2h) • redOx is stable • the RedOx decreases RedOx has reached alarm • the RedOx has reached the maximum alarm value value (factory pre-set at 800 ... -
Page 81: Mode In Progress
Installation and Operation Guide Version E-Box MAESTRO - Programming CAUTION A RedOx too high can damage elements of the basin! A RedOx too low can be dangerous for hygiene! ü ensure that: ü the spigot has been removed from the RedOx probe (see Probe Unit [ →... - Page 82 Installation and Operation Guide Version E-Box MAESTRO - Programming 1. Place the switch in alarm mode (rear side of the Inner Display). calib alarm ð Alarm mode is selected on the Inner Display: 2. Press to select the pH low alarm.
- Page 83 Installation and Operation Guide Version E-Box MAESTRO - Programming 12. Use to set the conductivity low alarm value 13. Press to validate the conductivity low alarm value. 14. Press to select the conductivity high alarm. 15. Press to select the conductivity value 16.
- Page 84 Installation and Operation Guide Version E-Box MAESTRO - Programming Change of units & voluntary correction of values Info All these values remain stored when changing batteries. This mode allows you to modify the units of: • air temperature & water temperature (factory pre-set in °C);...
- Page 85 4. Return the switch to the ON mode (rear side of the Inner Display). Calibration of a pH probe Due to its nature, a pH probe needs to be recalibrated regularly (preferably before the season). The pH Probe Pentair is available as a spare part from your dealer Pentair. Tools • pH probe;...
- Page 86 Installation and Operation Guide Version E-Box MAESTRO - Programming 1. Place the switch in calibration mode (rear side of the Inner Display). calib alarm ð Calibration mode is selected on the Inner Display: 2. Press 5 times to select the pH trend.
-
Page 87: Audible Alarm Status
Installation and Operation Guide Version E-Box MAESTRO - Programming ð The procedure is complete. ð Procedure ð Check the presence of a pH 4.0 solution in contact with the probe for the duration of the procedure. ð The probe is no longer functional (to be replaced). -
Page 88: Battery Level
Installation and Operation Guide Version E-Box MAESTRO - Programming 5.2.9 Battery level The level of the batteries is displayed under the pictogram representing each element concerned. Battery life is longer than 1 year but may vary depending on weather and usage conditions. -
Page 89: Operations
Installation and Operation Guide Version E-Box MAESTRO - Operations Operations Commissioning Turning on When first starting up: • the facade panels must be installed on the E-Box; • the light on the front of the E-Box box must be illuminated, indicating the presence of voltage;... - Page 90 Installation and Operation Guide Version E-Box MAESTRO - Operations Info Switching on a Radio Relay or Inner Display triggers the recognition/machine learning of a radio code. New Radio Relay no. 2 1. Remove the the tub by pulling on the tab.
-
Page 91: Re-Learning The Original Inner Display
Installation and Operation Guide Version E-Box MAESTRO - Operations New display no. 2 1. Remove the battery door. 2. Remove the insulating film from the batteries. 3. Inner Display no. 2 goes into radio learning mode. 4. Inner Display no. 2 displays the same values as Inner Display no. 1. -
Page 92: Operation Of The Internet Relay
Installation and Operation Guide Version E-Box MAESTRO - Operations ð The Inner Display goes into radio learning mode. Chec Conn Send 4. The Inner Display displays the values. 5. Replace the battery door. Data 6. Replace the orange cover on the MAESTRO Probe Unit. -
Page 93: Home Automation-Pool Account
Installation and Operation Guide Version E-Box MAESTRO - Operations Grid connection led Initialization fault or no power supply ( Check the connection of the power cable. Lack of network ( Check the connection of the Ethernet cable and check the internet connection. - Page 94 Installation and Operation Guide Version E-Box MAESTRO - Operations The serial number is located on the identification plate of the Inner Display, it is the five digits that follow the letters SN (1). This number can also be found on the last cover page of this document.
-
Page 95: Maintenance
Installation and Operation Guide Version E-Box MAESTRO - Maintenance Maintenance Maintenance Clean the outside of the various items with a dry microfiber cloth. Do not use solvents, abrasives or acids. Wintering of the MAESTRO (T° water < +3.0°C) • Over-wintering: the forced operation of the pump prevents the formation of ice on the surface. -
Page 96: Radio Relay And Inner Display
Installation and Operation Guide Version E-Box MAESTRO - Maintenance Radio Relay and Inner Display Radio Relay The Radio Relay being fixed to the outside, the appearance of traces of deposition is quite normal. 1. Clear and clean the lens of any bodies obstructing the window (sheets, stains, etc.) Inner Display The Inner Display is exclusively intended for inner use. - Page 97 Installation and Operation Guide Version E-Box MAESTRO - Maintenance 3. Rinse the tip of the probe thoroughly under running water for 5 minutes. 5 min 4. Screw the protective cage back on gently. 5. For pH probe only, calibrate the probe.
-
Page 98: Alkaline Battery Replacement
Installation and Operation Guide Version E-Box MAESTRO - Maintenance Alkaline battery replacement The life of the batteries supplied is more than one year (depending on the conditions of use). New batteries must be alkaline type, do not use rechargeable batteries. -
Page 99: Changing Inner Display Batteries
Installation and Operation Guide Version E-Box MAESTRO - Maintenance 4. Reconnect the battery pack. 5. Red LED flashes for 10 s. ð The Inner Display Radio Relay battery symbol shall indicate full batteries after 30 s. 6. Raise the jar. 7.6.2 Changing Inner Display Batteries ü... - Page 100 Installation and Operation Guide Version E-Box MAESTRO - Maintenance 4. Check the battery power level on the Inner Display screen. 5. Replace the protective cover (2). ð Battery level is updating. Info Changing the batteries does not erase the customisation of the Inner Display programming.
-
Page 101: Troubleshooting
Installation and Operation Guide Version E-Box MAESTRO - Troubleshooting Troubleshooting Alert Messages Alert Messages Meanings MAESTRO does not manage to stop or launch the filtration. 1. Check the connections, that the 3-position switch is on Clock/Auto and the correct connection of A1A2. -
Page 102: Spare Part
Installation and Operation Guide Version E-Box MAESTRO - Spare part Spare part Genuine parts, necessary for the maintenance of your device Pentair, are available at your dealers. SB Item Code Description Diagram SB-PD-PRO-001A pH probe 50 cm cable and standard solutions pH4 & pH7... -
Page 103: Disposal
This will help reduce the impact on the environment, health and safety, and also promote recycling. Pentair does not collect used products for recycling. Contact your local recycling centre. for more information. -
Page 104: Annexes
Installation and Operation Guide Version E-Box MAESTRO - Annexes Annexes Electrical diagrams of the Maestro 104 / 110 Ref. SB-CU-IMP-062EBA / A - 11.05.2023... - Page 105 Installation and Operation Guide Version E-Box MAESTRO - Annexes Ref. SB-CU-IMP-062EBA / A - 11.05.2023 105 / 110...
- Page 106 Installation and Operation Guide Version E-Box MAESTRO - Annexes 106 / 110 Ref. SB-CU-IMP-062EBA / A - 11.05.2023...
- Page 107 Installation and Operation Guide Version E-Box MAESTRO - Annexes Ref. SB-CU-IMP-062EBA / A - 11.05.2023 107 / 110...
- Page 108 Installation and Operation Guide Version E-Box MAESTRO - Annexes 108 / 110 Ref. SB-CU-IMP-062EBA / A - 11.05.2023...
- Page 109 Installation and Operation Guide Version E-Box MAESTRO Notes Ref. SB-CU-IMP-062EBA / A - 11.05.2023 109 / 110...
- Page 110 WWW.PENTAIRPOOLEUROPE.COM All Pentair trademarks and logos are the property of Pentair. The brands, trademarks and logos of third parties are the property of their respective owners. © 2023 Pentair. All rights reserved.