Table of Contents
Advertisement
7.4
Radio Relay and Inner Display
Radio Relay
The Radio Relay being fixed to the outside, the appearance of traces of deposition is quite normal.
1. Clear and clean the lens of any bodies obstructing the window (sheets, stains, etc.)
Inner Display
The Inner Display is exclusively intended for inner use. Exposure to sunlight (UV) or rain can
irreversibly damage it.
1. Do not subject the device to shocks or forces that could impair the operation or limit the life
of the device.
2. Do not immerse the appliance in water.
3. Clean the exterior with a micro-fiber cloth or sponge. Do not use solvents, abrasives or acids.
7.5
Cleaning the pH or RedOx probe
Mandatory
Wearing glasses is mandatory!
Info
Deposition of scale or suspended elements in the basin may occur. The probes are
fragile measuring elements, they should be cleaned with care, and most particularly the
platinized surfaces of the electrodes of the conductivity probe should not be scratched.
Physical cleaning of the probe in case of presence of an element in the protective cage
Depending on the environment of the probe, organisms may develop and disrupt the
measurement. It then becomes necessary to physically clean the end of the probe (pH or RedOx).
1. Carefully unscrew the protective cage by hand.
2. Using a toothbrush previously soaked in white vinegar, gently brush the tip of the probe until
the foreign body is completely removed.
Ref. SB-CU-IMP-058EBA / A - 11.05.2023
Installation and Operation Guide Version E-Box INTELLIPOOL - Maintenance
87 / 102
Advertisement
Table of Contents
