Table of Contents
Advertisement
5.1.3
Lighting menu
Options:
• Manual: Have access to lighting through the remote control.
• Clock: Set the time slots in the Clock Setting sub-menu.
• Off: Permanently turn off the lighting.
1. Select lighting mode with
2. Press
to confirm the selection.
5.1.4
Filtration menu
1
1.
Mode selection in progress
2.
Filter cleaning assistance
3.
Filtration range
Ref. SB-CU-IMP-058EBA / A - 11.05.2023
Installation and Operation Guide Version E-Box INTELLIPOOL - Programming
and
.
2
3
• Auto: Automatically calculates filtration time
based on water temperature
• On: Filtration runs 24 hours a day
• Off: Filtration is stopped (be careful, the frost-
free mode becomes inactive)
• Clock: Filtration will work in each time range
selected in the Setting menu
• Shock: The Shock function triggers 24 HOURS of
filtration and forced electrolysis. This function
can be useful after a high attendance of the pool
and a high temperature in the pool. At the end of
the Shockmode, the INTELLIPOOL switches back
to Auto
• Filter cleaning assistance [
• This menu makes you master of the start time
and the end time of the filtration in order to
control the noise pollution related to your pool
(noise of the filtration) vis-à-vis the neighborhood.
By default, leave End on Auto
• By checking one of the priorities, you agree that
this one controls the filtration outside the
authorized time slots (because these equipment
require to operate when the filtration is on). If
necessary, the filtration is restarted in one-hour
cycles until the desired setpoint value is obtained
• In Auto, INTELLIPOOLcalculate the filtration end
time
5
4
→
Page 62]
61 / 102
Advertisement
Table of Contents
