Installation and Operation Guide Version E-Box INTELLIPOOL - Installation
4.10.2
Examples of connections of IN inputs
Input IN1 (terminal block 31-32)
1. In the menu "Pool Properties > Menu Installation 4X Extension", see Menu installation 4X
Extension [
→
Page 47], select the related input "pH Tank or RedOx" and customise the name
if necessary.
Connection of a roller shutter limit switch
1. Connect the limit switch directly to the selected input. Example Input IN 2 (terminal blocks
33-34).
2. In the menu "Pool Properties > Menu Installation 4X Extension", see Menu installation 4X
Extension [
Page 47], select the input "Roller shutter" and customise the name if
→
necessary.
Connecting an element before you turn off the filtration (NO or NF)
1. Connect the switch directly to the selected input. Example Input IN 2 (terminals 35-36).
2. In the "Pool Properties > Menu Installation 4X Extension" menu, see Menu installation 4X
Extension [
→
Page 47], select the "Stop NO or NF filtration" and customise the name if
necessary.
48 / 102
31 32
Normally open level sensor
(switch closed = tank empty)
33 34
Dry contact closed when the cover closes pool
Roller Shutter Electrical Box
Ref. SB-CU-IMP-058EBA / A - 11.05.2023