Pentair E-Box INTELLIPOOL Installation And Operation Manual page 67

5.2.2.1 Temperatures
The Inner Display provides the temperature in °C):
e.g.: The air temperature is
28.5°C
e.g.: The water temperature is
24.0°C
Info
Adherence to the North-South orientation of the Radio Relay improves the accuracy of
air temperature measurement.
If the installation includes two Radio Relays, the one whose jumper is ON will provide
these values, see Adding a Radio Relay and/or Inner Display [
an offset between a displayed temperature value and the reference value provided by a
standard device, it is possible to recover this offset through the "calibration" menu, see
Calibration mode [
5.2.2.2 Detection of the risk of frost (water and air)
The air temperature is -2.5°C
Ref. SB-CU-IMP-058EBA / A - 11.05.2023
Installation and Operation Guide Version E-Box INTELLIPOOL - Programming
The air temperature accompanied by the pictogram
The water temperature accompanied by the pictogram
→ Page 75].
The water freeze pictogram is displayed if the water
temperature is below +3°C. There is a risk of ice formation, it
is necessary to intervene to avoid damage on the pool and on
the hydraulic installation.
• active wintering: force the pump to fight against the
formation of frost, the probes can then remain in the
water. This frost-free function is automatic when
INTELLIPOOL is paired with the INTELLIPOOL Probe
Unit.
• passive wintering: take the probes out of the bypass and
replace the probes on the probes for their preservation.
The Inner Display will then display measured values in
the water of the protective cushions.
For more details, see the chapter "Wintering of your pond".
Page 80]. In the event of
→
67 / 102