Related Manuals for Pentair E-Box INTELLIPOOL
Summary of Contents for Pentair E-Box INTELLIPOOL
- Page 1 INSTALLATION AND OPERATION GUIDE Version E-Box INTELLIPOOL IMPORTANT SAFETY INSTRUCTIONS Read and follow all the instructions Keep these instructions WWW.PENTAIRPOOLEUROPE.COM...
-
Page 2: Table Of Contents
Installation and Operation Guide Version E-Box INTELLIPOOL - Table of Contents Table of Contents General.................... Scope of this document................Version Management .................. Manufacturer identification (ID), product ........... Technical assistance procedure..............Copyright and Trademarks ................. Limitation of Liability .................. Declaration of conformity ................ - Page 3 Installation and Operation Guide Version E-Box INTELLIPOOL - Table of Contents Internet Relay....................29 Inner Display ....................30 Radio Relay....................31 E-Box......................33 4.8.1 Wall mounting ..................... 4.8.2 Connections......................4.8.3 Connection of the " PENTAIR VSF " filter pump..........4.8.4 Connection of the heat pump power supply (if installed)........
- Page 4 Installation and Operation Guide Version E-Box INTELLIPOOL - Table of Contents 6.4.1 Home automation-pool account ................. Maintenance ..................86 Maintenance....................86 Wintering of the INTELLIPOOL (T° water < +3.0°C) ........86 pH and RedOx probes ................. 86 Radio Relay and Inner Display ..............87 Cleaning the pH or RedOx probe ..............
-
Page 5: General
Installation and Operation Guide Version E-Box INTELLIPOOL - General General Scope of this document This document contains the information necessary for proper use of the product. It informs the user in order to guarantee the proper execution of the installation, use and maintenance procedures. -
Page 6: Copyright And Trademarks
Installation and Operation Guide Version E-Box INTELLIPOOL - General Copyright and Trademarks All trademarks and logos Pentair are the property of Pentair. The brands, trademarks and logos of third parties are the property of their respective owners. © 2023 Pentair. All rights reserved. -
Page 7: Declaration Of Conformity
Installation and Operation Guide Version E-Box INTELLIPOOL - General Declaration of conformity Guidelines – Harmonised standards Pentair International LLC - Avenue de Sevelin 20 - 1004 Lausanne - Suisse We declare that the product meets the guidelines and take responsibility for it: • 2014/53/EU. -
Page 8: Pentair Scan Application
Installation and Operation Guide Version E-Box INTELLIPOOL - General Pentair Scan Application The mobile application Pentair Scan is an ideal tool for the daily work of the maintenance technician. The simple reading of the identification label present on the product, with a smart phone, gives instant access to all its information. -
Page 9: Security
Installation and Operation Guide Version E-Box INTELLIPOOL - Security Security Definition of safety pictograms DANGER This combination of symbol and keyword indicates an imminently hazardous situation that will result in serious or fatal injury if not avoided. WARNING This combination of symbol and keyword indicates a potentially hazardous situation that can result in serious or fatal injury if not avoided. -
Page 10: Risks
Installation and Operation Guide Version E-Box INTELLIPOOL - Security Risks All safety and protection instructions contained in this document must be followed in order to avoid injury, property damage or environmental, irremediable or temporary pollution. Likewise, all other regulations and measures for accident prevention and environmental... - Page 11 Installation and Operation Guide Version E-Box INTELLIPOOL - Security WARNING Water temperatures above 37.7°C are a health hazard! Prolonged immersion in hot water can cause hyperthermia. Taking alcohol, drugs or medication is a factor aggravating the risk of hyperthermia in hot water baths and spas.
-
Page 12: Hardware
Installation and Operation Guide Version E-Box INTELLIPOOL - Security Mandatory This installation and operation guide contains important information about the installation, operation and safety of this product! This guide should be provided to the owner and / or operator of this product. - Page 13 Installation and Operation Guide Version E-Box INTELLIPOOL - Security Prohibition Do not mix sodium hypochlorite and muriatic acid (hydrocloric acid)! Do not mix out of water, chlorinated product and pH fix! Info Devices intended for any other use than use by a one person family, may require...
-
Page 14: Description
Installation and Operation Guide Version E-Box INTELLIPOOL - Description Description Technical specifications E-Box Protection rating IP44 System pre-wiring INTP-1010C Operating voltage 230V Input power supply frequency 50 Hz Power 14 kW max Number of inputs Number of outputs 8x (230V/16A max) 4x (12V/16A max) 1x (24 V/3 A max) -
Page 15: Congestion Diagram
Installation and Operation Guide Version E-Box INTELLIPOOL - Description • Maximum relative humidity of 80% for temperatures up to 31°C decreasing in a linear manner to 50% relative humidity at 40°C; • Mains power supply voltage variations of ± 10% of the nominal voltage. - Page 16 Installation and Operation Guide Version E-Box INTELLIPOOL - Description Control Centre and Probe Unit (both cases have the same dimensions) Control Center Probe Unit 16 / 102 Ref. SB-CU-IMP-058EBA / A - 11.05.2023...
-
Page 17: Product Description
Installation and Operation Guide Version E-Box INTELLIPOOL - Description Product Description 3.3.1 General operation The diagram below describes an example of a typical installation of a fully automated and remotely controlled swimming pool. Refer to the relevant item for more information about it. -
Page 18: The E-Box
Installation and Operation Guide Version E-Box INTELLIPOOL - Description 3.3.2 The E-Box The E-Box is a turnkey system for quickly and simply making all the connections to the various pieces of equipment in the installation. The connections between the boxes provided (E-Box and INTELLIPOOL are carried out through cables to rapid connectors and thus allow operation by means of control and information remotely (this occurs with the connection of the installation to the internet through box internet of the user). -
Page 19: Control Centre
Installation and Operation Guide Version E-Box INTELLIPOOL - Description 3.3.3 Control Centre The Control Centre automatically controls and calculates the operating time of the equipment connected to the system, it is the brain of the installation. It receives the orders transmitted by the remote control device or by the internet and communicates with the device concerned. -
Page 20: Probe Unit
Installation and Operation Guide Version E-Box INTELLIPOOL - Description 3.3.4 Probe Unit The device is equipped with five probes that allow it to measure the properties and values of the water. The information collected is then transmitted to the Control Centre to refine the adjustment of the water regulation. -
Page 21: Inner Display
Installation and Operation Guide Version E-Box INTELLIPOOL - Description Radio antenna Connector for Ethernet cable Power supply connector This relay, once connected to your internet box (see Internet Relay [ → Page 29]), created a radio network allowing it to send and receive information from your installation. -
Page 22: Radio Relay
Installation and Operation Guide Version E-Box INTELLIPOOL - Description 3.3.7 Radio Relay The Radio Relay is used to relay radio waves between the technical room and the internet box through the Internet Relay. It must be placed outside, for example in the garden halfway between the technical room and the house. -
Page 23: Extension Unit
Installation and Operation Guide Version E-Box INTELLIPOOL - Description 3.3.8 4X Extension Unit The 4X Extension module is an input and output extension module installed in your E-Box. It will allow you to connect more equipment to your system. The module consists of 4 IN inputs, 2 AL alarm inputs and 4 AUX outputs. -
Page 24: Installation
Installation and Operation Guide Version E-Box INTELLIPOOL - Installation Installation Warnings CAUTION Risk of injury due to electric shock or pressurised elements! It is strictly forbidden for any unqualified personnel to access the internal components of the system in order to carry out any technical work whatsoever. -
Page 25: Package Contents
Installation and Operation Guide Version E-Box INTELLIPOOL - Installation Package contents • 1 E-Box • 4 Cables for the connections of the INTELLIPOOL in the E-Box • 1 Intelliflo VSF pump control cable • Cable glands set for installation of cables in box E-Box •... -
Page 26: Accessories Provided Depending On The Options Chosen
Installation and Operation Guide Version E-Box INTELLIPOOL - Installation Accessories provided depending on the options chosen 4.3.1 Analysis chamber Supplied with the installation kit, it must be installed as close as possible to the Probe Unit box, and receives the measurement probes provided: RedOx, pH and conductivity. -
Page 27: Pool Water Treatment Liquid Solution Injection Metering Pump
Installation and Operation Guide Version E-Box INTELLIPOOL - Installation 4.3.2 Pool water treatment liquid solution injection metering pump The solution injection metering pump is supplied with the installation kit, it must be installed separately from the electrical box, integral with the wall of the technical room, in accordance with its instructions. -
Page 28: Salt Electrolysis Cell For Chlorine Production 13 Or 27 G/H (Optional)
Installation and Operation Guide Version E-Box INTELLIPOOL - Installation 4.3.3 Salt electrolysis cell for chlorine production 13 or 27 g/h (optional) Connection cable This equipment is intended for the production of chlorine from swimming pool water. The salt electrolysis cell is provided as an option with the installation kit, it must be installed bypass or online (max accepted flow rate of 18 m... -
Page 29: Internet Relay
Installation and Operation Guide Version E-Box INTELLIPOOL - Installation Internet Relay Info Install and connect the Internet Relay first. The pairing of the various devices will thus be automatic. 1. Connect the provided Ethernet cable (5) to the Internet Relay (1) and your internet modem (4). -
Page 30: Inner Display
Installation and Operation Guide Version E-Box INTELLIPOOL - Installation Inner Display Caution - material Do not expose the appliance to sun (UV) or rain. Risk of irreversible damage to the interior display. The display is intended for inner use. 1. Install 4 AA batteries indoors. -
Page 31: Radio Relay
Installation and Operation Guide Version E-Box INTELLIPOOL - Installation Radio Relay Start-up Info Switching on a Radio Relay or Inner Display triggers the recognition/machine learning of a radio code. 1. Remove the the tub by pulling on the tab. 2. Place the jumper in the OFF position to avoid disturbing the outdoor temperature and UV index values of Radio Relay K no. - Page 32 Installation and Operation Guide Version E-Box INTELLIPOOL - Installation Positioning Info The Radio Relay should be placed high up (on a wall or pole for example), away from any metal object (iron fence, zinc gutter). 1. Use the compass to orient the Radio Relay to the south thanks to the reference provided for this purpose.
-
Page 33: E-Box
Installation and Operation Guide Version E-Box INTELLIPOOL - Installation E-Box 4.8.1 Wall mounting Caution - material The device must not be installed outdoors, preferring instead a technical room inaccessible to children. • Ensure that the bracket on which the appliance is installed can support a load of 10 kg. -
Page 34: Connections
Installation and Operation Guide Version E-Box INTELLIPOOL - Installation Info The quick-connect cables are connected to the bottom of theE-Box (7). Install the cable ducts provided according to the diameter and number of cables used. The cable ducts prevent moisture or acid vapour from entering the device. Never leave an empty hole unused without protection. - Page 35 Installation and Operation Guide Version E-Box INTELLIPOOL - Installation 230V socket INTELLICHLOR Cell connection INTELLIPOOL Power supply connector INTELLIPOOL Control connector 1 INTELLIPOOL Control connector 2 INTELLIPOOL Robot Socket 230V Data connector Cable routing Main protection with 30 mA differentials...
- Page 36 Installation and Operation Guide Version E-Box INTELLIPOOL - Installation 1. High voltage connection (230V) 2. Low voltage connection (12/24V) Terminal block 1: High voltage Terminal block 2: Low voltage connection (230V) [ → Page 36] connection (12-24 V) [ → Page 37] 230V minimum power compatible cables = R02V (3x1.5mm²...
- Page 37 Installation and Operation Guide Version E-Box INTELLIPOOL - Installation Connection of the Heat Pump Power Supply (230 V) Variable Speed Pump Power Supply Connection (230 V) Pool Automatic Shutter Power Supply Connection (230 V) Connection of the Metering Pump Power Supply for pH control (230 V)
-
Page 38: Connection Of The " Pentair Vsf " Filter Pump
The control of the operation of the heat pump must be connected to terminals 21-22 (refer to the instructions for the heat pump used). The connection of the BUS control cable for a Pentair heat pump (Invertemp) must be made on the terminal blocks 47 and 48, do not use the terminal blocks 21-22. -
Page 39: Connection Of The Pool Automatic Shutter Power Supply (If Equipped)
Installation and Operation Guide Version E-Box INTELLIPOOL - Installation IntelliFlo control, Pentair PAC, Dedicated terminal block (+) 47/(-) 48 Inside the E-Box 4.8.5 Connection of the pool automatic shutter power supply (if equipped) The connection of the supply phase, the neutral and the earth must be made through the connection terminal block according to terminals 5 and 6 (for the earth connection: proceed to the connection on the dedicated terminal block). - Page 40 Installation and Operation Guide Version E-Box INTELLIPOOL - Installation 5. Secure the appliance (2) using the two bottom screws (4). 6. Install the two covers (3) of the screws in order to ensure the tightness of the device (2). Info The quick-connect cables are connected to the bottom of the appliance (2).
-
Page 41: Hydraulic And Electrical Installation
Installation and Operation Guide Version E-Box INTELLIPOOL - Installation 4.9.2 Hydraulic and electrical installation The diagram below illustrates the electrical and hydraulic connections of the Probe Unit with the analysis chamber. Mandatory It is imperative to isolate the bypass by closing both valves before changing a probe. -
Page 42: Installation Of Probes
Installation and Operation Guide Version E-Box INTELLIPOOL - Installation Install the probes in the analysis chamber The Probe Unit comes with a probe to having previously removed the lower part measure water temperature. A second (the transparent bowl) of the analysis probe (optional) can be installed to chamber. - Page 43 Installation and Operation Guide Version E-Box INTELLIPOOL - Installation 1. Unscrew the spigots. Screw/unscrew cylinders Never push or pull the cylinders that have the cap Prohibition Prohibition of pushing or pulling the cramps. Risk of damage to probes. 2. Install the probes in the analysis chamber provided.
- Page 44 Installation and Operation Guide Version E-Box INTELLIPOOL - Installation Installing the water temperature sensor Install the water temperature probe preferably before the pump filtration system. 1. Drill the PVC pipe (Ø50-70 mm) to make a hole with a diameter of 10 mm.
-
Page 45: Connections
Installation and Operation Guide Version E-Box INTELLIPOOL - Installation 4.9.4 Connections 4.9.4.1 Probe Units Connections Quick connection to the Control Centre Cable feed for probes Swimming pool shutter limit switch Liquid Chlorine Pump Low Level Sensor pH Regulator Pump Low Level Sensor... - Page 46 Installation and Operation Guide Version E-Box INTELLIPOOL - Installation 4.9.4.2 Control Centre connections Connector cable 1 connected with the E-Box Connection with Probe Unit CONTACT INFO cable Connection with the E-Box Connector cable 2 connected to the E-Box Intellipool power supply cable connection to the E-Box 220V Connections to be made to the Control Centre box, through the fast cables (provided).
-
Page 47: Extension Unit
Installation and Operation Guide Version E-Box INTELLIPOOL - Installation Info Only the Pentair probes are compatible and guarantee the proper functioning of the device. 4.10 4X Extension Unit 4.10.1 Menu installation 4X Extension Info The menu is only accessible through the website. See Website and Home Automation Control Application [ →... -
Page 48: Examples Of Connections Of In Inputs
Installation and Operation Guide Version E-Box INTELLIPOOL - Installation 4.10.2 Examples of connections of IN inputs Input IN1 (terminal block 31-32) 1. In the menu “Pool Properties > Menu Installation 4X Extension”, see Menu installation 4X Extension [ → Page 47], select the related input “pH Tank or RedOx” and customise the name if necessary. - Page 49 Installation and Operation Guide Version E-Box INTELLIPOOL - Installation 35 36 Dry contact Normally Open or Normally Closed depending on choice: NO = Normally Open = allows filtration (closing it will immediately stop filtration) NF = Normally Closed = allows filtration (opening it will immediately stop...
-
Page 50: Aux Output Connections
Installation and Operation Guide Version E-Box INTELLIPOOL - Installation 31 32 1 - Dry contact whose closing time will be recorded in the history (such as a water meter type filling sensor) 33 34 1a - Installation of a relay closing a switch. Use a relay compatible with the... - Page 51 Installation and Operation Guide Version E-Box INTELLIPOOL - Installation Terminal block 27-28 (by dry contact) Terminal blocks 13-14 (by 230V power supply) 13 14 24 V Phase (L) Earth Neutral (N) pH - Connecting an additional pump or apparatus >12A at 230V 1.
- Page 52 Installation and Operation Guide Version E-Box INTELLIPOOL - Installation Connecting a 3-way valve to the Control Centre (for fountain triggering...) 1. Connect the valve according to the diagram below. 2. In the menu “Pool Properties > Menu Installation 4X Extension”, see Menu installation 4X Extension [ Page 47], select the output “Aux 4”...
- Page 53 Installation and Operation Guide Version E-Box INTELLIPOOL - Installation Pool lighting independent connection 1. Connect the additional lighting according to the diagram below, terminal blocks 13-14 (230 V / 10 A Max). 2. In the menu “Pool Properties > Menu Installation 4X Extension”, see Menu installation 4X Extension [ Page 47], select the output AUX 4 “AUX”...
- Page 54 Installation and Operation Guide Version E-Box INTELLIPOOL - Installation < 10A through terminal blocks (25-26 Aux3, 13-14 Aux4 or 15-16 Aux5) Earth > 10A through terminal blocks 23-24 Phase (L) Earth Neutral (N) Connecting a Solar Heater 1. Connect the solar heater according to the choice of the diagram below.
- Page 55 Installation and Operation Guide Version E-Box INTELLIPOOL - Installation 2. In the menu “Pool Properties > Menu Installation 4X Extension”, see Menu installation 4X Extension [ → Page 47], select the output AUX 2 “Filling” and customise the name if necessary.
-
Page 56: Settings Done On Www.intellipool.eu
Installation and Operation Guide Version E-Box INTELLIPOOL - Installation 4.10.4 Settings done on www.intellipool.eu Info Once the Intelliflo pump is connected and powered on through the Intellipool, log into its Intellipool account to perform the Intelliflo pump speed setting. The swimming pool concerned then receives a new “Intelliflo” submenu. -
Page 57: Programming
Installation and Operation Guide Version E-Box INTELLIPOOL - Programming Programming Programming the INTELLIPOOL Control Centre 5.1.1 Presentation Time Settings menu Setting menu [ Page 58] → Date Lighting menu Lighting menu [ Page 61] → Water temperature Filtration menu Filtration menu [ Page 61]... -
Page 58: Setting Menu
Installation and Operation Guide Version E-Box INTELLIPOOL - Programming 5.1.1.1 Navigation keys Exhaust Go back to the previous step without considering the changes. Displacement down/decrementation Navigation down in drop-down menus or decrementation of values in numerical spaces. Displacement up/incrementation Upward navigation in drop-down menus or incrementing values in numerical spaces. - Page 59 Installation and Operation Guide Version E-Box INTELLIPOOL - Programming Disinfectant Options: • Auto: Automatically adjust based on RedOX. • Off: Turn off the power to the electrolyser completely. • Instruction: Change the RedOx value to be reached in Auto mode (650 mV factory).
- Page 60 Installation and Operation Guide Version E-Box INTELLIPOOL - Programming 1. Select the radio menu option with 2. Press to confirm the selection and proceed to the next parameter. Memo. Installation The menu asks to start learning on the immersed case.
-
Page 61: Lighting Menu
Installation and Operation Guide Version E-Box INTELLIPOOL - Programming 5.1.3 Lighting menu Options: • Manual: Have access to lighting through the remote control. • Clock: Set the time slots in the Clock Setting sub-menu. • Off: Permanently turn off the lighting. -
Page 62: Aux1 Menu
Installation and Operation Guide Version E-Box INTELLIPOOL - Programming Filtration Settings • This setting increases or decreases the filtration time to compensate for pump size and/or activity in the pool • Factory settings (editable in the Installation menu): – Turbo = +30% –... -
Page 63: History Menu
Installation and Operation Guide Version E-Box INTELLIPOOL - Programming 5.1.6 History Menu 1. Access the secure menu history of the day INTELLIPOOL by pressing for 4 secs. 2. Access the 4 pages of the history of the day by pressing on :... - Page 64 Installation and Operation Guide Version E-Box INTELLIPOOL - Programming • Eco (default -30%): Decreases the filtration time (in %) from the normally calculated time. • Turbo (default +30%): Increases the filtration time (in %) of the normally calculated time. 5.1.7.3 pH installation Modification of the injection parameters of the pH regulator.
-
Page 65: Inner Display Programming
Installation and Operation Guide Version E-Box INTELLIPOOL - Programming Inner Display Programming 5.2.1 Presentation The remote Inner Display informs of all parameters (updated every 15 minutes) of water quality and comfort (temperatures, UV). Intended for inner use, pre-programmed alerts make it possible at a glance to check the chemical balance of the water without making the tedious analyses at the edge of the basin. -
Page 66: Air/Water Temperature
Installation and Operation Guide Version E-Box INTELLIPOOL - Programming Audible Alarm Status Radio Signal Strength On/off Radio Signal Strength [ Page 79] → Audible Alarm Status [ Page 78] → 5.2.1.1 Navigation keys Info Pressing any key stops an audible alarm. Exhaust Go back to the previous step without considering the changes. - Page 67 Installation and Operation Guide Version E-Box INTELLIPOOL - Programming 5.2.2.1 Temperatures The Inner Display provides the temperature in °C): The air temperature accompanied by the pictogram e.g.: The air temperature is 28.5°C The water temperature accompanied by the pictogram e.g.: The water temperature is 24.0°C...
-
Page 68: Ph Trend
Installation and Operation Guide Version E-Box INTELLIPOOL - Programming The gel pictogram related to the air temperature is displayed if the temperature measured by the Radio Relay is less than +3°C. The water temperature is 0.5°C 5.2.3 pH trend pH trend (update every 2h) •... -
Page 69: Conductivity Trend
Installation and Operation Guide Version E-Box INTELLIPOOL - Programming Info The set values of the high and low pH alarms are factory pre-set to 6.7 and 7.9. These values can be modified through the alarm mode (see Alarm mode [ →... - Page 70 Installation and Operation Guide Version E-Box INTELLIPOOL - Programming Value of measured • display limited between 0 and 1999 conductivity • value out of display limit: – Conductivity < 0 g/l – Conductivity > 19.99 g/l Unit used • g/l unit used for salt electrolysis • µS unit used without salt electrolysis The choice of the conductivity unit (μS or g/l) is made by the...
-
Page 71: Redox Trend
Installation and Operation Guide Version E-Box INTELLIPOOL - Programming Info A zero (or close to zero) conductivity value indicates the presence of air in the probe tube. 5.2.5 RedOx Trend RedOx Trend (Updated • the RedOx every 2h) • redOx is stable •... -
Page 72: Mode In Progress
Installation and Operation Guide Version E-Box INTELLIPOOL - Programming CAUTION A RedOx too high can damage elements of the basin! A RedOx too low can be dangerous for hygiene! ü ensure that: ü the spigot has been removed from the RedOx probe (see Probe Unit [ →... - Page 73 Installation and Operation Guide Version E-Box INTELLIPOOL - Programming 1. Place the switch in alarm mode (rear side of the Inner Display). calib alarm ð Alarm mode is selected on the Inner Display: 2. Press to select the pH low alarm.
- Page 74 Installation and Operation Guide Version E-Box INTELLIPOOL - Programming 12. Use to set the conductivity low alarm value 13. Press to validate the conductivity low alarm value. 14. Press to select the conductivity high alarm. 15. Press to select the conductivity value 16.
- Page 75 Installation and Operation Guide Version E-Box INTELLIPOOL - Programming Change of units & voluntary correction of values Info All these values remain stored when changing batteries. This mode allows you to modify the units of: • air temperature & water temperature (factory pre-set in °C);...
- Page 76 4. Return the switch to the ON mode (rear side of the Inner Display). Calibration of a pH probe Due to its nature, a pH probe needs to be recalibrated regularly (preferably before the season). The pH Probe Pentair is available as a spare part from your dealer Pentair. Tools • pH probe;...
- Page 77 Installation and Operation Guide Version E-Box INTELLIPOOL - Programming 1. Place the switch in calibration mode (rear side of the Inner Display). calib alarm ð Calibration mode is selected on the Inner Display: 2. Press 5 times to select the pH trend.
-
Page 78: Audible Alarm Status
Installation and Operation Guide Version E-Box INTELLIPOOL - Programming ð The procedure is complete. ð Procedure ð Check the presence of a pH 4.0 solution in contact with the probe for the duration of the procedure. ð The probe is no longer functional (to be replaced). -
Page 79: Battery Level
Installation and Operation Guide Version E-Box INTELLIPOOL - Programming 5.2.9 Battery level The level of the batteries is displayed under the pictogram representing each element concerned. Battery life is longer than 1 year but may vary depending on weather and usage conditions. -
Page 80: Operations
Installation and Operation Guide Version E-Box INTELLIPOOL - Operations Operations Commissioning Turning on When first starting up: • the facade panels must be installed on the E-Box; • the light on the front of the E-Box box must be illuminated, indicating the presence of voltage;... - Page 81 Installation and Operation Guide Version E-Box INTELLIPOOL - Operations Info Switching on a Radio Relay or Inner Display triggers the recognition/machine learning of a radio code. New Radio Relay no. 2 1. Remove the the tub by pulling on the tab.
-
Page 82: Re-Learning The Original Inner Display
Installation and Operation Guide Version E-Box INTELLIPOOL - Operations New display no. 2 1. Remove the battery door. 2. Remove the insulating film from the batteries. 3. Inner Display no. 2 goes into radio learning mode. 4. Inner Display no. 2 displays the same values as Inner Display no. 1. -
Page 83: Operation Of The Internet Relay
Installation and Operation Guide Version E-Box INTELLIPOOL - Operations ð The Inner Display goes into radio learning mode. 4. The Inner Display displays the values. 5. Replace the battery door. 6. Replace the orange cover on the INTELLIPOOL Probe Unit. -
Page 84: Home Automation-Pool Account
Installation and Operation Guide Version E-Box INTELLIPOOL - Operations Grid connection led Initialization fault or no power supply ( Check the connection of the power cable. Lack of network ( Check the connection of the Ethernet cable and check the internet connection. - Page 85 Installation and Operation Guide Version E-Box INTELLIPOOL - Operations The serial number is located on the identification plate of the Inner Display, it is the five digits that follow the letters SN (1). This number can also be found on the last cover page of this document.
-
Page 86: Maintenance
Installation and Operation Guide Version E-Box INTELLIPOOL - Maintenance Maintenance Maintenance Clean the outside of the various items with a dry microfiber cloth. Do not use solvents, abrasives or acids. Wintering of the INTELLIPOOL (T° water < +3.0°C) • Over-wintering: the forced operation of the pump prevents the formation of ice on the surface. -
Page 87: Radio Relay And Inner Display
Installation and Operation Guide Version E-Box INTELLIPOOL - Maintenance Radio Relay and Inner Display Radio Relay The Radio Relay being fixed to the outside, the appearance of traces of deposition is quite normal. 1. Clear and clean the lens of any bodies obstructing the window (sheets, stains, etc.) Inner Display The Inner Display is exclusively intended for inner use. - Page 88 Installation and Operation Guide Version E-Box INTELLIPOOL - Maintenance 3. Rinse the tip of the probe thoroughly under running water for 5 minutes. 5 min 4. Screw the protective cage back on gently. 5. For pH probe only, calibrate the probe.
-
Page 89: Alkaline Battery Replacement
Installation and Operation Guide Version E-Box INTELLIPOOL - Maintenance Alkaline battery replacement The life of the batteries supplied is more than one year (depending on the conditions of use). New batteries must be alkaline type, do not use rechargeable batteries. -
Page 90: Changing Inner Display Batteries
Installation and Operation Guide Version E-Box INTELLIPOOL - Maintenance 4. Reconnect the battery pack. 5. Red LED flashes for 10 s. ð The Inner Display Radio Relay battery symbol shall indicate full batteries after 30 s. 6. Raise the jar. 7.6.2 Changing Inner Display Batteries ü... - Page 91 Installation and Operation Guide Version E-Box INTELLIPOOL - Maintenance 4. Check the battery power level on the Inner Display screen. 5. Replace the protective cover (2). ð Battery level is updating. Info Changing the batteries does not erase the customisation of the Inner Display programming.
-
Page 92: Troubleshooting
Installation and Operation Guide Version E-Box INTELLIPOOL - Troubleshooting Troubleshooting Alert Messages Alert Messages Meanings INTELLIPOOL does not manage to stop or launch the filtration. 1. Check the connections, that the 3-position switch is on Clock/Auto and the correct connection of A1A2. - Page 93 Installation and Operation Guide Version E-Box INTELLIPOOL - Troubleshooting Alert Messages Meanings Check the connection of all connected devices on the BUS. Ref. SB-CU-IMP-058EBA / A - 11.05.2023 93 / 102...
-
Page 94: Spare Part
Installation and Operation Guide Version E-Box INTELLIPOOL - Spare part Spare part Genuine parts, necessary for the maintenance of your device Pentair, are available at your dealers. SB Item Code Description Diagram INTP-5210 pH probe 50 cm cable and standard solutions pH4 & pH7... -
Page 95: Disposal
This will help reduce the impact on the environment, health and safety, and also promote recycling. Pentair does not collect used products for recycling. Contact your local recycling centre. for more information. -
Page 96: Annexes
Installation and Operation Guide Version E-Box INTELLIPOOL - Annexes Annexes Electric diagrams of the E-Box INTELLIPOOL 96 / 102 Ref. SB-CU-IMP-058EBA / A - 11.05.2023... - Page 97 Installation and Operation Guide Version E-Box INTELLIPOOL - Annexes Ref. SB-CU-IMP-058EBA / A - 11.05.2023 97 / 102...
- Page 98 Installation and Operation Guide Version E-Box INTELLIPOOL - Annexes 98 / 102 Ref. SB-CU-IMP-058EBA / A - 11.05.2023...
- Page 99 Installation and Operation Guide Version E-Box INTELLIPOOL - Annexes Ref. SB-CU-IMP-058EBA / A - 11.05.2023 99 / 102...
- Page 100 Installation and Operation Guide Version E-Box INTELLIPOOL - Annexes 100 / 102 Ref. SB-CU-IMP-058EBA / A - 11.05.2023...
- Page 101 Installation and Operation Guide Version E-Box INTELLIPOOL Notes Ref. SB-CU-IMP-058EBA / A - 11.05.2023 101 / 102...
- Page 102 WWW.PENTAIRPOOLEUROPE.COM All Pentair trademarks and logos are the property of Pentair. The brands, trademarks and logos of third parties are the property of their respective owners. © 2023 Pentair. All rights reserved.