Internet Relay - Pentair E-Box INTELLIPOOL Installation And Operation Manual

4.5

Internet Relay

Info
Install and connect the Internet Relay first.
The pairing of the various devices will thus be automatic.
5
1. Connect the provided Ethernet cable (5) to the Internet Relay (1) and your internet modem (4).
Info
In the event of a connection problem with the technical room, the supplied Ethernet
cable can be replaced by an equivalent cable with a maximum length of 100 meters.
2. Connect the power cord (2) to the Internet Relay (1) and to an electrical socket (3).
ð The Internet Relay is then configured automatically. The relay dome is then backlit in
fixed orange.
If this is not the case (the dome is not backlit or it is flashing orange), check that:
• the DHCP server of your internet modem is activated;
• port 8001 used by the Internet Relay is open.
Ref. SB-CU-IMP-058EBA / A - 11.05.2023
Installation and Operation Guide Version E-Box INTELLIPOOL - Installation
1
2
3
4
29 / 102