Pentair E-Box INTELLIPOOL Installation And Operation Manual page 54

Installation and Operation Guide Version E-Box INTELLIPOOL - Installation
< 10A through terminal blocks (25-26 Aux3, 13-14 Aux4 or 15-16 Aux5)
Earth
> 10A through terminal blocks 23-24
Phase (L)
Earth
Neutral (N)
Connecting a Solar Heater
1. Connect the solar heater according to the choice of the diagram below.
2. Connect the solar heater temperature probe to terminals 43-44.
3. Connect the three-way valve opening control to terminals 25-26 (AUX 3).
4. In the menu "Pool Properties > Menu Installation 4X Extension", see Menu installation 4X
Extension [ → Page 47], select the output AUX 3 "Filter Wash" and customise the name if
necessary.
25 26
24 V
Connecting a water level regulator too low (Normally Open N.O.)
1. Connect the sensor and the filling solenoid valve according to the choice of the diagram
below.
54 / 102
43 44
Solar T°
SB-PD-PRO-004B
Ref. SB-CU-IMP-058EBA / A - 11.05.2023