Functional requirements
▷
To lock the vehicle, the vehicle key must be
outside of the vehicle near the doors.
▷
The next unlocking and locking cycle is not
possible until after approx. 2 seconds.
Unlocking
General information
The behavior of the vehicle during unlocking
via the Comfort Access depends on the follow-
ing settings:
▷
If the unlocking of the vehicle is confirmed
with a light signal or a sound signal.
▷
If the welcome light is switched on when
the vehicle is being unlocked.
Unlocking the vehicle
Grasp the handle of a vehicle door completely.
In addition, the following functions are exe-
cuted:
▷
If a driver profile was assigned to the vehi-
cle key, this driver profile will be activated
and the settings that are stored in it will be
applied.
▷
The interior lights are switched on, unless
they were manually switched off.
▷
Folded in exterior mirrors are folded out.
Opening and closing
Online Edition for Part no. 01405A7B930 - II/23
If the exterior mirrors were folded in via the
button in the interior, they will not be folded
out when unlocking.
▷
With alarm system: The alarm system will
be switched off.
Locking
General information
The behavior of the vehicle during locking via
the Comfort Access depends on the following
settings:
▷
If the locking of the vehicle is confirmed
with a light signal or a sound signal.
▷
If the exterior mirrors are automatically
folded in when the vehicle is locked. The
exterior mirrors are not folded in when the
hazard warning flashers are switched on.
▷
If pathway lighting is activated during lock-
ing.
Locking the vehicle
Close the driver's door.
Touch the grooved surface on the handle of a
closed vehicle door with your finger for approx.
1 second without grasping the door handle.
The following functions are executed:
▷
All doors, the trunk lid, and the fuel filler flap
are locked.
▷
With alarm system: The alarm system will
be switched on.
CONTROLS
97
OwnersManuals2.com