Table of Contents
Advertisement
CONTROLS
Memory function
Principle
The following settings can be stored and, if
necessary, retrieved using the memory func-
tion:
▷
Seat position.
▷
Exterior mirror position.
▷
Steering wheel position.
▷
Height of the Head-up display.
General information
Two memory locations with different settings
can be set for each driver profile.
The following settings are not stored:
▷
Backrest width.
▷
Lumbar support.
Safety information
Warning
Using the memory function while driving can
lead to unexpected seat or steering wheel
movements. Vehicle control could be lost.
There is a risk of accident. Only retrieve the
memory function when the vehicle is station-
ary.
Warning
There is a danger of jamming when moving
the seats. There is a risk of injury or risk
of damage to property. Make sure that the
travel path of the seat is clear prior to any
adjustment.
126
Seats, mirrors and steering wheel
Online Edition for Part no. 01405A7B930 - II/23
Overview
The memory buttons are located on the front
door.
Storing
1.
Set the desired position.
2.
Press the button. The LED in the
button illuminates.
3.
Press the desired button 1 or 2 while the
LED is illuminated. A signal sounds.
Calling up settings
Press the desired button 1 or 2.
The stored position is called up.
The procedure stops when a switch for setting
the seat is pressed or one of the memory but-
tons is pressed again.
The adjustment of the seat position on the
driver's side is interrupted after a short time
while driving.
Seat and armrest heating
Principle
The system heats seats and armrests as
needed.
General information
Seat heating can also be used without arm-
rest heating. Deactivate the armrest heating as
needed.
OwnersManuals2.com
Advertisement
Table of Contents
