General information
Depending on the equipment, the exterior
lighting of the vehicle can be set individually.
Activating/deactivating welcome
light
1.
"CAR"
2.
"Settings"
3.
"Exterior lighting"
4.
Depending on the equipment, select the
following setting:
▷
"Welcome and goodbye"
When unlocking the vehicle, individual
lighting functions are switched on for a
limited time.
▷
"BMW Kidney 'Iconic Glow'"
The radiator grille lighting can only be
adjusted when the vehicle is stationary
and the drive-ready state is switched
off.
Pathway lighting
Principle
For the pathway lighting, the exterior lighting
turns on for a certain period of time after leav-
ing the vehicle in order to illuminate the area
surrounding the vehicle.
Switching pathway lighting on
After switching off the drive-ready state, briefly
push the turn signal lever forward.
Setting the duration
1.
"CAR"
2.
"Settings"
3.
"Exterior lighting"
4.
"Pathway lighting"
Online Edition for Part no. 01405A7B930 - II/23
Lights
5.
Select the desired setting.
6.
"OK"
Daytime driving lights
General information
The daytime driving lights illuminate when
drive-ready state is switched on.
Activating/deactivating daytime
driving lights
In some countries, daytime driving lights are
mandatory, so it may not be possible to deacti-
vate the daytime driving lights in front.
1.
"CAR"
2.
"Settings"
3.
"Exterior lighting"
4.
Depending on the national-market version:
"Daytime driving lights" or "Daytime driving
lights, rear"
Adaptive lighting functions
Principle
Adaptive lighting functions enable dynamic il-
lumination of the road.
General information
The adaptive lighting functions may consist of
one system or multiple systems, depending on
the equipment version:
▷
Adaptive Light Control.
▷
Cornering light.
Activating
Press the button on the light switch.
The LED in the button illuminates.
CONTROLS
179
OwnersManuals2.com