BMW 8 CONVERTIBLE 2023 Series Owner's Manual page 226

CONTROLS
Continuing cruise control
An interrupted cruise control can be continued
by calling up the stored speed.
Make sure that the difference between current
speed and stored speed is not too large be-
fore calling up the stored speed. Otherwise,
unwanted vehicle deceleration or acceleration
may occur.
Press the button with the system in-
terrupted.
Cruise control is continued with the stored val-
ues.
In the following cases, the stored speed value
is deleted and cannot be called up again:
▷ When the system is switched off.
▷ When drive-ready state is switched off.
Displays in the instrument cluster
Display in the speedometer
Depending on the equipment, a mark in the
speedometer displays the status of the sys-
tem.
▷ Green marking: system is ac-
tive, the marking indicates
the desired speed.
▷ Gray marking: system is in-
terrupted, the marking indi-
cates the stored speed.
▷ No marking: system is switched off.
226
Driver assistance systems
Online Edition for Part no. 01405A7B930 - II/23
Indicator light
Icon Description
No indicator light: system is switched
off.
Indicator light green: system is active.
Gray indicator light: the system has
been interrupted.
Displays in the Head-up display
Some system information can also be dis-
played in the Head-up display.
The icon is displayed when the set
speed is reached.
System limits
The set speed is also maintained downhill. The
speed may not be maintained on uphill grades
if the drive power is insufficient.
In ECO PRO driving mode, the vehicle may
exceed or drop below the set desired speed
in some situations, for instance on downhill or
uphill grades.
Active Cruise Control with
Stop&Go function
Principle
Using the Cruise Control, a desired speed and
a distance to a vehicle ahead can be adjusted
using the buttons on the steering wheel.
General information
The system maintains the set speed on clear
roads. The vehicle accelerates or brakes auto-
matically.
OwnersManuals2.com