Table of Contents
Advertisement
mate control will not have sufficient time to ad-
just the set temperature.
Temperature of the ventilation
General information
The temperature of the ventilation in the upper
body area can be adjusted.
The air flow of the ventilation in the upper body
area heats or cools noticeably, depending on
the adjusted temperature.
This does not change the set interior tempera-
ture for the driver and front passenger.
Adjust temperature of the ventilation
1.
"CAR"
2.
"Settings"
3.
"Climate control"
4.
"Heating/ventilation"
5.
"Driver" or "Front passenger"
6.
"Temperature adjustment"
7.
Set the desired temperature.
The temperature is individually adjusted, e.g.
colder toward blue, warmer toward red.
Air conditioning
Principle
The air in the interior will be cooled and dehu-
midified and, depending on the temperature
setting, warmed again.
Functional requirement
The interior can only be cooled with the drive-
ready state switched on.
Switch air conditioning on/off
Using the button:
Press the button on the lower side.
Online Edition for Part no. 01405A7B930 - II/23
Climate control
Via iDrive:
1.
"CAR"
2.
"Settings"
3.
"Climate control"
4.
"Heating/ventilation"
5.
"A/C"
Depending on the weather, the windshield and
the side windows may fog up briefly when
drive-ready state is switched on.
Air conditioning is switched on automatically
with the AUTO program.
When using the cooling mode, condensation
that will exit below the vehicle.
Maximum cooling
Principle
The system is set to the lowest temperature,
optimum air flow and recirculated-air mode
with the drive-ready state switched on.
Functional requirement
The function is available at an outside temper-
ature above approx. 32 ℉/0 ℃ and with the
drive-ready state switched on.
Switching maximum cooling on/off
Press the button.
The LED is illuminated when maxi-
mum cooling is switched on.
Air flows out of the air vents to the upper body
area. The air vents need to be open for this.
The air flow can be adjusted with the program
active.
AUTO program
Principle
The AUTO program cools, ventilates or heats
the car's interior automatically.
CONTROLS
275
OwnersManuals2.com
Advertisement
Table of Contents
