Table of Contents
Advertisement
▷
On: the LED illuminates.
▷
Off: the LED goes out.
Depending on the equipment version, the rear-
view camera cannot be switched off when the
reverse gear is engaged.
Automatic deactivation during forward
travel
The system switches off when a certain dis-
tance travelled or speed is exceeded.
Switch the system back on, if needed.
Display on the control display
Overview
1
Toolbar, left
2 Camera image
3 Side view
4 Automatic camera perspective
5 Movable unobstructed camera perspective
6 Toolbar, right
7 Rearview camera
8 Selection window
Toolbar on the left
The left toolbar can be used for the direct se-
lection of various views via iDrive. Move the
Controller to the left, if needed.
▷
"Parking": around the vehicle.
▷
"3D view": available camera.
▷
"Car wash".
Driver assistance systems
Online Edition for Part no. 01405A7B930 - II/23
Side view
The side view can be selected for the right or
left vehicle side.
This view shows the vehicle's side surround-
ings, making it easier to position the vehicle at
the curb or with other obstacles on the side.
The side view looks from rear to front and, in
case of danger, focuses automatically on pos-
sible obstacles.
Automatic camera perspective
The automatic camera perspective shows a
steering-dependent view in the respective driv-
ing direction.
This perspective adapts to the respective driv-
ing situation.
As soon as obstacles are detected, the view
changes to a fixed display of the area in front
or at the rear behind the bumper or, if neces-
sary, changes to a side view.
When reverse gear is engaged, the automatic
camera perspective is, if necessary, exited and
the system uses a fixed perspective of the
rearview camera. If necessary, manually se-
lect the automatic camera perspective when
reverse gear is engaged. The automatic cam-
era perspective will be retained for the current
parking operation.
Movable unobstructed camera
perspective
With selection of the movable camera perspec-
tive, a circle appears on the control display.
By turning the Controller or via touch function,
specified perspectives on the circle can be se-
lected.
The current perspective is marked with a cam-
era icon.
To leave the function, move the Controller
sideways and select another camera view.
CONTROLS
261
OwnersManuals2.com
Advertisement
Table of Contents
