Table of Contents
Advertisement
QUICK REFERENCE
Gasoline
For the best fuel efficiency, the gasoline should
be sulfur-free or very low in sulfur content.
Fuels that are marked on the gas pump as
containing metal must not be used.
Wheels and tires
Tire pressure specifications
The tire inflation pressure specifications can be
found in the tire inflation pressure table in the
printed Owner's Manual.
After correcting the tire pressure
For the flat tire monitor:
Reinitialize the Flat Tire Monitor.
With Tire Pressure Monitor:
The corrected tire inflation pressures are ap-
plied automatically. Make sure that the correct
tire settings have been made.
With tires that cannot be found in the tire pres-
sure values on the control display, reset the
Tire Pressure Monitor (TPM).
Checking the tire pressure
Regularly check the tire inflation pressure and
correct it as needed:
▷
At least twice a month.
▷
Before embarking on an extended trip.
Cleaning the wheels
The friction during hard braking may produce
brake dust and make the rims dirty. Brake dust
can be removed by cleaning the rims. BMW
recommends using vehicle care and cleaning
agents from BMW.
Electronic oil measurement
Functional requirements
A current measured value is available after ap-
prox. 30 minutes of normal driving.
28
On the road
Online Edition for Part no. 01405A7B930 - II/23
Displaying the engine oil level
1.
"CAR"
2.
"Vehicle status"
3.
"Engine oil level"
Different messages appear on the control dis-
play depending on the engine oil level. Pay at-
tention to these messages.
Adding engine oil
General information
Safely park the vehicle and switch off drive-
ready state before adding engine oil.
Adding engine oil
Only add engine oil when the message is dis-
played in the instrument cluster.
Observe the top-up quantity in the message.
Take care not to add too much engine oil.
Observe recommended engine oil types.
OwnersManuals2.com
Advertisement
Table of Contents
