Table of Contents
Advertisement
CONTROLS
Setting Lane Departure Warning
Setting the warning time
1.
"CAR"
2.
"Settings"
3.
"Driver Assistance"
4.
"Safety and Warnings"
5.
"Lane Departure Warning"
6.
Select the desired setting:
▷
"Early"
▷
"Medium"
▷
"Reduced": some warnings are sup-
pressed depending on the situation,
for instance when purposely driving over
pathway lines in curves or with dynamic
passing without a turn signal.
▷
"Off": no warnings are issued.
Setting the intensity of the steering
wheel vibration
1.
"CAR"
2.
"Settings"
3.
"Driver Assistance"
4.
"Steering Wheel Feedback"
5.
"Vibration intensity"
6.
Select the desired setting.
The setting is applied to all Intelligent Safety
systems.
Switching steering intervention on/off
The steering intervention can be switched on
and off separately for Active Blind Spot Detec-
tion and lane departure warning.
1.
"CAR"
2.
"Settings"
3.
"Driver Assistance"
4.
"Safety and Warnings"
5.
"Lane Departure Warning"
6.
"Steering intervention"
202
Safety
Online Edition for Part no. 01405A7B930 - II/23
Depending on the national-market version, the
steering intervention is automatically active af-
ter every driving off.
Display in the instrument cluster
Different system statuses are displayed on
the instrument cluster, depending on vehicle
equipment and national-market version.
Icon
Meaning
Indicator light illuminates green: Sys-
tem is switched on. A lane boundary
has been detected on at least one
side of the vehicle and the system is
ready to intervene. Warnings will be
issued.
Indicator light flashes green: System
is performing a steering intervention.
Depending on the equipment and national-
market version, information for the system is
displayed in the Assisted Driving View of the
instrument cluster.
Additional information:
Assisted Driving View, refer to page 157.
Warning function
If you leave the lane
If you leave the lane and if a lane boundary
has been detected, the steering wheel vibrates
in accordance with the steering wheel vibration
setting.
When the turn signal is switched on in the cor-
responding direction before changing the lane,
a warning is not issued.
Steering intervention
Depending on the equipment and national-
market version: if, in the speed range up to
130 mph/210 km/h a lane boundary is crossed,
the system may intervene with a brief active
steering intervention in addition to vibrating.
OwnersManuals2.com
Advertisement
Table of Contents
