Table of Contents
Advertisement
Jacking up the vehicle
Warning
Hands and fingers can be jammed when us-
ing the jack. There is a risk of injury. Comply
with the described hand position and do not
change this position while using the jack.
1.
Hold the vehicle jack with one hand, ar-
row 1, and grasp the jack crank handle or
lever with your other hand, arrow 2.
2.
Insert the jack into the rectangular recess of
the jacking point closest to the wheel to be
changed.
3.
Extend the jack by turning the jack crank
handle or lever clockwise.
Online Edition for Part no. 01405A7B930 - II/23
Wheels and tires
4.
Take your hand away from the jack as soon
as the jack is under load and continue turn-
ing the jack crank handle or lever with one
hand.
5.
Make sure that the car jack foot extends
vertically and is at a right angle beneath the
jacking point.
6.
Make sure that the car jack foot is vertical
and at a right angle beneath the jacking
point after extending the vehicle jack.
7.
Crank the vehicle up until the vehicle jack
has the entire surface on the ground
and the relevant wheel is maximum 1.2 in-
ches/3 cm above ground.
Mounting a wheel
Mount one emergency wheel only, as required.
1.
Unscrew the lug bolts.
2.
Remove the wheel.
3.
Put the new wheel or emergency wheel on
and screw in at least two lug bolts in a
crosswise pattern until hand-tight.
When non-original light-alloy wheels of the
vehicle manufacturer are mounted, the ac-
MOBILITY
341
OwnersManuals2.com
Advertisement
Table of Contents
