Table of Contents
Advertisement
NOTE
This device has been tested for human expo-
sure limits and found compliant at a minimum
distance of 2 in/5 cm during operation.
Therefore, a distance of 4 in/10 cm must be
maintained in every direction when operating
the device.
Mounting position of the product.
Safety information
Warning
When charging a Qi-compatible device in the
wireless charging tray, any metal objects on
the tray together with the device can become
very hot. If storage media or electronic cards,
e.g., chip cards, cards with magnetic strips,
or cards that transmit signals, are placed on
the tray together with the device, they may
not function correctly. There is a risk of injury
and risk of damage to property. When charg-
ing mobile devices, make sure there are no
objects on the tray together with the device.
Overview
Tray in the center console:
Online Edition for Part no. 01405A7B930 - II/23
Interior equipment
1
LED
2 Storage area
Functional requirements
▷
The device to be charged must be certified
according to the Qi standard.
▷
Standby state is switched on.
▷
The mobile phone must not exceed the
maximum size of approximately 6.0 x 3.1
x 0.7 in/154.5 x 80 x 18 mm.
▷
Protective sleeves and covers must be suit-
able for wireless charging.
▷
The mobile phone to be charged is located
in the center of the tray. The mobile phone
display is pointing upwards.
Inserting the mobile phone
1.
Open the tray cover.
2.
Place the mobile phone centered in the tray
with the display facing up.
3.
Close the tray cover.
CONTROLS
291
OwnersManuals2.com
Advertisement
Table of Contents
