Table of Contents
Advertisement
Overview
Seat and armrest heating
Turning on
1.
Press the button.
2.
Select the temperature level:
▷
Press the button once for each level.
▷
Turn the Controller until the desired
level is reached. Press the Controller.
▷
Select the desired level on the touch-
screen.
Highest level reached when three red LEDs
illuminate on the button or three red bars
are shown on the control display.
If the trip is continued within approx. 15 mi-
nutes after an intermediate stop, the functions
are turned on automatically with the tempera-
ture that was last set.
When ECO PRO is activated, the heater output
is reduced.
Additional information:
ECO PRO, refer to page 307.
Turning off
Press and hold the button until the
LEDs turn off.
Seats, mirrors and steering wheel
Online Edition for Part no. 01405A7B930 - II/23
Seat heating distribution
The heating effect in the seat surface and the
seat backrest can be distributed in different
ways.
1.
"CAR"
2.
"Settings"
3.
"Climate control"
4.
Select the desired menu item.
5.
Select desired seat.
6.
Press the Controller and turn it to set the
seat heating distribution.
Switching armrest heating on/off
1.
"CAR"
2.
"Settings"
3.
"Climate control"
4.
"Seat and armrest heating"
5.
Select desired seat.
6.
"Heat armrests with seat"
Air collar
Principle
The air collar ensures just the right tempera-
ture for the neck area via warm air inlet.
General information
When the convertible top is open, the air inlet
and the temperature are adjusted according to
speed and outside temperature.
When the convertible top is closed, the three
adjustable settings are independent of speed
and outside temperature.
CONTROLS
127
OwnersManuals2.com
Advertisement
Table of Contents
