Table of Contents
Advertisement
MOBILITY
Automatic triggering
When certain prerequisites are met, for in-
stance if the airbags deploy, an emergency call
is automatically initiated immediately after an
accident of corresponding severity. Automatic
Collision Notification is not affected by press-
ing the SOS button.
Manual triggering
1.
Tap the cover flap.
2.
Press and hold the SOS button until the
LED in the area of the button illuminates
green.
▷
The LED is illuminated green when an
emergency call has been initiated.
If a cancel prompt appears on the control
display, the emergency call can be aborted.
If the situation allows, wait in the vehicle
until the voice connection has been estab-
lished.
▷
The LED flashes green when a connection
to the BMW Response Center has been es-
tablished.
The BMW Response Center then makes
contact with the occupants of the vehicle
and initiates further steps to help.
Even if you are unable to respond, the
BMW Response Center can take further
steps to help you under certain circumstan-
ces.
For this purpose, data that serves to deter-
mine the necessary rescue measures, for
instance the current position of the vehicle
when it can be determined, is transmitted
to the BMW Response Center.
Even if the BMW Response Center is no
longer heard through the loudspeakers, the
BMW Response Center may still be able to
hear the occupants of the vehicle.
The BMW Response Center ends the emer-
gency call.
362
Breakdown Assistance
Online Edition for Part no. 01405A7B930 - II/23
Malfunction
The function of the emergency call may be im-
paired.
The LED in the area of the SOS button flashes
for approximately 30 seconds. A Check Control
message is displayed.
An emergency call may be disrupted in the fol-
lowing circumstances, among others:
▷
Extended vehicle idle times.
▷
Intense sunlight on vehicle roof.
Have checked by an authorized service center
or another qualified service center or repair
shop.
Jump-starting
General information
If the battery is discharged, the engine can
be started using the battery of another vehicle
and two jumper cables. Only use jumper ca-
bles with fully insulated clamp handles.
Safety information
DANGER
Contact with live components can lead to an
electric shock. There is a risk of injury or dan-
ger to life. Do not touch any components that
are under voltage.
Warning
If the jumper cables are connected in the
incorrect order, spark formation may occur.
There is a risk of injury. Pay attention to the
correct order during connection.
OwnersManuals2.com
Advertisement
Table of Contents
