Table of Contents
Advertisement
▷ Pressing the Start/Stop button.
▷ Releasing the parking brake.
▷ Opening and closing the doors or win-
dows.
▷ Engaging selector lever position N.
▷ Using vehicle equipment.
There is a risk of accidents or injuries. Do not
leave children or animals unattended in the
vehicle. Take the vehicle key with you when
exiting and lock the vehicle.
Overview
Parking brake
Setting the parking brake
With a stationary vehicle
Pull the switch.
The LED illuminates.
The indicator light in the instrument
cluster illuminates red. The parking
brake is set.
While driving
General information
Use while driving serves as an emergency
braking function.
Online Edition for Part no. 01405A7B930 - II/23
Driving
Pull the switch and hold it. The vehicle
brakes hard while the switch is being
pulled.
The indicator light in the instrument
cluster illuminates red, a signal sounds,
and the brake lights illuminate.
A Check Control message is displayed.
The parking brake is engaged when the vehi-
cle is stationary.
With Emergency Stop Assistant
Pull the switch briefly to activate the
emergency stop function.
Additional information:
Emergency Stop Assistant, refer to page 210.
Releasing the parking brake
Releasing the parking brake manually
1.
Turn on drive-ready state.
2.
Press the switch while stepping on
the brake pedal or selector lever position P
is set.
The LED and the indicator light go out.
The parking brake is released.
Releasing the parking brake
automatically
The parking brake is released automatically
when you drive off.
The LED and the indicator light go out.
Automatic Hold
Principle
Automatic Hold assists the driver by automati-
cally setting and releasing the brake, such as
when moving in stop-and-go traffic.
CONTROLS
143
OwnersManuals2.com
Advertisement
Table of Contents
