Table of Contents
Advertisement
CONTROLS
Speed warning
Principle
The speed warning can be used to set a speed
limit. A warning will be issued when this speed
limit is exceeded.
General information
The warning is repeated if the vehicle speed
exceeds the set speed limit again after drop-
ping below it by 3 mph/5 km/h.
Adjusting
1.
"CAR"
2.
"Settings"
3.
"General settings"
4.
"Speed warning"
5.
"Warning above:"
6.
Turn the Controller until the desired speed
is displayed.
7.
Press the Controller.
Activate/deactivate
1.
"CAR"
2.
"Settings"
3.
"General settings"
4.
"Speed warning"
5.
"Speed warning"
Applying current speed as the
speed warning
1.
"CAR"
2.
"Settings"
3.
"General settings"
4.
"Speed warning"
5.
"Select current speed"
62
General settings
Online Edition for Part no. 01405A7B930 - II/23
Activating/deactivating pop-
ups
For some functions, pop-ups are displayed
automatically on the control display. Some of
these pop-ups can be activated or deactivated.
1.
"CAR"
2.
"Settings"
3.
"General settings"
4.
"Pop-ups"
5.
Select the desired setting.
Control display
Brightness
1.
"CAR"
2.
"Settings"
3.
"Displays"
4.
"Control display"
5.
"Brightness at night"
6.
Press the Controller.
7.
Turn the Controller until the desired bright-
ness is set.
8.
Press the Controller.
Depending on the light conditions, the bright-
ness control may not be clearly visible.
Reset vehicle data
All individual settings can be reset to the fac-
tory settings when the drive-ready state is
switched off. Data can only be deleted while
stationary.
1.
"CAR"
2.
"Settings"
3.
"General settings"
OwnersManuals2.com
Advertisement
Table of Contents
