Table of Contents
Advertisement
With Steering Assistant.
Without Steering Assistant.
Cruise control is continued with the stored val-
ues.
In the following cases, the stored speed value
is deleted and cannot be called up again:
▷
When the system is switched off.
▷
When drive-ready state is switched off.
Changing between Cruise Control
with/without Distance Control
Safety information
Warning
The system does not react to traffic driv-
ing ahead of you, but instead maintains the
stored speed. There may be a risk of acci-
dents or risk of damage to property. Adjust
the set speed to the traffic conditions and
brake as needed.
Changing over the Cruise Control mode
Switching Cruise Control without Distance
Control off and on:
▷
Press and hold this button.
▷
Press and hold this button.
With Steering Assistant: switch on Distance
Control:
Press the button.
Without Steering Assistant: switch on Distance
Control:
▷
Press the button.
▷
Press the button.
Driver assistance systems
Online Edition for Part no. 01405A7B930 - II/23
After changing, a Check Control message is
displayed.
Displays in the instrument cluster
General information
Depending on the equipment version, the dis-
plays in the instrument cluster may vary.
Display in the speedometer
Depending on the equipment, a mark in the
speedometer displays the status of the sys-
tem.
▷
Green marking: system is ac-
tive, the marking indicates
the desired speed.
▷
Gray marking: system is in-
terrupted, the marking indi-
cates the stored speed.
▷
No marking: system is switched off.
Distance to vehicle ahead of you
Selected distance to the vehicle ahead of you
is shown.
Icon
Description
Distance 1
Distance 2
Distance 3
CONTROLS
231
OwnersManuals2.com
Advertisement
Table of Contents
