BMW 8 CONVERTIBLE 2023 Series Owner's Manual page 181

The headlights are automatically changed be-
tween low beams and high beams.
The blue indicator light in the instru-
ment cluster illuminates when the sys-
tem switches on the high beams.
Interruption of journey with activated Auto-
matic High Beam Assistant: the Automatic
High Beam Assistant remains activated when
driving continues.
The Automatic High Beam Assistant is de-
activated when manually switching the high
beams on and off.
To reactivate the Automatic High Beam Assis-
tant, press the button on the turn signal lever.
Deactivating Automatic High Beam
Assistant
Press the button on the turn signal lever.
Sensitivity of the Automatic High
Beam Assistant
General information
The sensitivity of the Automatic High Beam
Assistant can be adjusted.
Online Edition for Part no. 01405A7B930 - II/23
Lights
Safety information
Warning
If adjustments have been made or the sen-
sitivity has been modified, oncoming traffic
may be momentarily blinded. There is a risk
of accident. If adjustments have been made
and the sensitivity has been modified, make
sure that oncoming traffic is not momentarily
blinded. Switch off the high beams manually
if required.
Functional requirements
▷ Setting at standstill only.
▷ Drive-ready state is switched on.
▷ Light is turned off.
Increasing sensitivity
Push the turn signal lever to the front for ap-
proximately 10 seconds.
A Check Control message is displayed. The
system responds more sensitively.
Resetting the sensitivity
Push the turn signal lever to the front again
for approx. 10 seconds or switch off the drive-
ready state.
The sensitivity of the Automatic High Beam
Assistant is reset to the factory settings.
System limits
The Automatic High Beam Assistant cannot
replace the driver's personal judgment of when
to use the high beams. In situations that re-
quire this, therefore dim manually.
The system is not fully functional in the follow-
ing situations, and driver intervention may be
necessary:
CONTROLS
181
OwnersManuals2.com