Table of Contents
Advertisement
CONTROLS
Parking using lanes and turning circle lines
1.
Position the vehicle so that the red turning
circle line leads to within the limits of the
parking space.
2.
Turn the steering wheel to the point where
the green pathway line covers the corre-
sponding turning circle line.
Obstacle marking
Depending on the equipment, obstacles be-
hind the vehicle are detected by the Park Dis-
tance Control sensors.
Obstacle markings can be faded into the im-
age of the rearview camera.
The colored steps of the obstacle markings
match the marks of the Park Distance Control.
Setting brightness and contrast
With the rearview camera switched on:
1.
Move the Controller to the right, if needed.
2.
"Camera image"
3.
Select the desired setting.
252
Driver assistance systems
Online Edition for Part no. 01405A7B930 - II/23
System limits
System limits of the sensors
Additional information:
▷
Cameras, refer to page 35.
Deactivated camera
When the camera is deactivated, for instance
when the trunk lid is open, the camera image is
displayed hatched in gray.
Detection of objects
Very low obstacles as well as high, protruding
objects such as ledges may not be detected by
the system.
Depending on the equipment, some assis-
tance functions also take into account data
from the Park Distance Control.
Follow the notes in the Park Distance Control
chapter.
The objects displayed on the control display
may be closer than they appear. Do not esti-
mate the distance from the objects on the dis-
play.
Automatic Parking Assistant
Principle
The Automatic Parking Assistant supports the
driver in the following situations:
OwnersManuals2.com
Advertisement
Table of Contents
