BMW 8 CONVERTIBLE 2023 Series Owner's Manual page 278

CONTROLS
SYNC program
Principle
The Sync program can be used to apply the
settings on the driver's side to the passenger's
side.
Switching the SYNC program on/off
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Synchronize"
The following settings of the driver's side can
be transferred to the passenger's side:
▷ Temperature.
▷ Air flow.
▷ Air distribution.
▷ AUTO program.
The program is switched off automatically if
the settings on the front passenger side are
changed.
Defrost function
Principle
Ice and condensation are quickly removed
from the windshield and the front side win-
dows.
Switching the Defrost function on/off
Press the button.
The LED of the button is illuminated
when the system is switched on.
The air flow can be adjusted manually with the
system switched on.
If there is window condensation, switch on the
AUTO program or the air conditioning to utilize
the condensation sensor. Make sure that air
can flow to the windshield.
278
Climate control
Online Edition for Part no. 01405A7B930 - II/23
Rear window defroster
Principle
Ice and condensation are removed from the
rear window quickly.
Functional requirement
The function is operational when the drive-
ready state is switched on.
Switching rear window defroster on/off
Press the button. The LED is illu-
minated with rear window defroster
switched on.
The rear window defroster switches off auto-
matically after a certain period of time.
Ventilation
Principle
The air flow directions can be adjusted individ-
ually for direct or indirect ventilation.
Setting the ventilation
General information
Open the air vents and position them to ensure
effective climate control.
Direct ventilation
The air flow is directed towards the passen-
gers. The air flow heats or cools noticeably,
depending on the adjusted temperature.
Indirect ventilation
The air flow is not directed towards the pas-
sengers. The vehicle interior is warmed or
cooled indirectly, depending on the set tem-
perature.
OwnersManuals2.com