Table of Contents
Advertisement
▷
Malfunction.
▷
During tire inflation pressure measurement,
after confirmation of the tire settings.
▷
For tires with special approval: a reset is
performed for the system.
For tires with special approval:
performing a reset
1.
"CAR"
2.
"Vehicle status"
3.
"Tire Pressure Monitor"
4.
Make sure that correct tire settings have
been made.
Tire settings, refer to page 329.
5.
Turn on drive-ready state and do not drive
off.
6.
Reset tire pressure: "Perform reset".
7.
Drive off.
The wheels are displayed in gray and the fol-
lowing is displayed: "Resetting tire pressure...".
After a travel time of several minutes, the set
tire inflation pressures are accepted as the
predefined tire inflation pressures. The reset is
completed automatically while driving.
After a successfully completed reset, the
wheels on the control display are shown in
green and the following is displayed: "Reset
successful."
You may interrupt this trip at any time. When
you continue driving the reset resumes auto-
matically.
Messages: for tires without special
approval
General information
When a flat tire is indicated, the Dynamic Sta-
bility Control may be turned on.
Online Edition for Part no. 01405A7B930 - II/23
Wheels and tires
Safety information
Warning
A damaged regular tire with low or no tire
inflation pressure impacts handling, such as
steering and braking response. Runflat tires
can maintain limited stability. There is a risk
of accident. Do not continue driving if the
vehicle is equipped with normal tires. Follow
the information on runflat tires and continued
driving with these tires.
If a tire inflation pressure check is
required
Message
An icon with a Check Control message appears
on the control display.
Icon
Possible cause
Inflation was not carried out accord-
ing to specifications, for instance
when the tire has not been suffi-
ciently inflated or in the case of a nat-
ural steady tire pressure loss.
Measure
Check the tire pressure and correct as needed.
If the tire inflation pressure is too low
Message
A yellow warning light is illuminated in
the instrument cluster.
In addition, an icon with a Check Control mes-
sage appears on the control display.
Icon
Possible cause
There is a tire pressure loss.
MOBILITY
331
OwnersManuals2.com
Advertisement
Table of Contents
