Table of Contents
Advertisement
When the vehicle and vehicle key will be
handed over, such as for maintenance, carry
out the following steps first:
▷
Setting up PIN.
▷
Canceling recognition using the vehicle key.
▷
Switching to the guest profile.
The handed over vehicle key can then no lon-
ger be used to access the personal driver pro-
file.
Selecting a driver profile
Depending on the recognition setting, the
driver profile will be selected automatically.
If the guest profile is active, the driver profile
will be selected on the Welcome screen or via
iDrive. A PIN may have to be entered.
1.
"CAR"
2.
"Driver profiles"
As an alternative for Steps 1 and 2, the pro-
file image can be tapped in the top status
bar.
3.
Select driver profile.
4.
"OK"
All settings stored in the selected driver profile
are automatically applied.
Switching synchronization with the
ConnectedDrive account on/off
Some of the settings saved to a driver pro-
file are synchronized with the personal Con-
nectedDrive account. This enables the use of
these personal settings in other BMW vehicles
with ConnectedDrive access, provided that this
function is supported.
The following settings are synchronized with
the ConnectedDrive account:
▷
Navigation.
▷
Data protection.
▷
Driver profile and driver assistance.
▷
Language.
Online Edition for Part no. 01405A7B930 - II/23
Personal settings
▷
Seat and climate control function.
▷
Exterior lights.
▷
Vehicle access.
▷
Head-up display.
▷
Main menu layout.
The synchronization with the ConnectedDrive
account is enabled when a driver profile is cre-
ated or via iDrive:
1.
"CAR"
2.
"Driver profiles"
3.
Tilt the Controller to the right.
As an alternative for Steps 1 to 3, the profile
image can be tapped in the top status bar.
4.
"Settings"
5.
"Synchronize driver profile"
6.
"Synchronize driver profile"
Renaming a driver profile
Non-ConnectedDrive countries:
1.
"CAR"
2.
"Driver profiles"
As an alternative for Steps 1 and 2, the pro-
file image can be tapped in the top status
bar.
3.
Select driver profile.
4.
"Settings"
5.
Enter a profile name.
6.
Select the icon.
ConnectedDrive countries:
The name of the driver profile is transferred
from the ConnectedDrive account. Changes for
the profile name must be made in the Con-
nectedDrive account.
Selecting a profile picture
1.
"CAR"
2.
"Driver profiles"
3.
Tilt the Controller to the right.
CONTROLS
69
OwnersManuals2.com
Advertisement
Table of Contents
