Table of Contents
Advertisement
▷
Press the button once for each level.
▷
Turn the Controller until the desired
level is reached. Press the Controller.
▷
Select the desired level on the touch-
screen.
Highest level reached when three blue
LEDs illuminate on the button or three blue
bars are shown on the control display.
Switching off active seat ventilation
Press and hold the button until the
LEDs turn off.
Seat climate control
Principle
The seat climate control combines the func-
tions of the seat heating and active seat venti-
lation.
General information
The seat heating and active seat ventilation
are operated with a common button on the air
conditioning control panel.
When both systems are active, a push of the
button reduces the intensity of both functions
by one level each.
The last active function or function that is con-
figured with higher intensity will be activated
directly when the system is switched on again.
When both functions with the same intensity
configuration are deactivated, the system will
automatically activate the seat heating.
Seats, mirrors and steering wheel
Online Edition for Part no. 01405A7B930 - II/23
Overview
Seat climate control
Turning on
1.
Press the button.
2.
Select the desired setting via the touch-
screen.
One red and one blue LED each will illumi-
nate.
Turning off
Press and hold the button until the
LEDs turn off.
Climate control rules
Principle
Depending on the equipment, some heating
and air conditioning functions can be automat-
ically activated depending on the outside tem-
perature.
General information
The outside temperature at which the func-
tions are to be automatically activated can be
set via iDrive.
Activation is performed if the outside temper-
ature exceeds or falls below the set tempera-
ture in the first few minutes after drive-ready
state has been switched on. A new adjustment
CONTROLS
129
OwnersManuals2.com
Advertisement
Table of Contents
