Table of Contents
Advertisement
Radar sensors, side, front
The radar sensors are located to the side in
the front bumper.
Radar sensors, side, rear
The radar sensors are located to the side be-
hind the rear bumper.
System limits of the radar sensors
The radar sensors may not be fully functional
or may not be available in the following situa-
tions:
▷
If sensors are dirty, such as due to icing.
▷
If sensors are covered, such as by labels,
films or a number plate baseplate.
▷
If the sensor is not aligned correctly, for in-
stance due to parking damage.
▷
If the radiation range of the sensors is cov-
ered, e.g., by protruding cargo.
▷
When the field of view of the sensors is cov-
ered, e.g., by garage walls, hedges, snow
hills, vehicles or trailers.
Sensors of the vehicle
Online Edition for Part no. 01405A7B930 - II/23
▷
After improper paint work on the vehicle in
the area of the sensors.
▷
On steep hilltops or in sharp dips in the
road.
If applicable, a Check Control message will be
displayed when the system limits are reached.
Ultrasonic sensors
Ultrasound sensors in the front/rear
bumpers
The ultrasonic sensors for Park
Distance Control are located in
the front and rear bumpers.
Ultrasonic sensors, side
The ultrasonic sensors for Parking Assistant
are located to the side in the front and rear
bumpers.
System limits of the ultrasonic
sensors
The detection of objects with ultrasonic meas-
urements can run into physical limits, e.g., in
the following situations:
▷
If the sensors are dirty or covered, e.g., by
stickers.
▷
If the sensor is not aligned correctly, for in-
stance due to parking damage.
CONTROLS
37
OwnersManuals2.com
Advertisement
Table of Contents
