Table of Contents
Advertisement
quantity is indicated in the message shown on
the control display.
Only add suitable types of engine oil.
Safely park the vehicle and switch off drive-
ready state before adding engine oil.
Take care not to add too much engine oil.
Safety information
Warning
Operating materials, for instance oils,
greases, coolants, fuels, can contain harmful
ingredients. There is a risk of injury or danger
to life. Follow the instructions on the contain-
ers. Avoid the contact of articles of clothing,
skin or eyes with operating materials. Do not
refill operating materials into different bottles.
Store operating materials out of reach of chil-
dren.
NOTICE
An engine oil level that is too low causes en-
gine damage. There is a risk of damage to
property. Immediately add engine oil.
NOTICE
Too much engine oil can damage the engine
or the catalytic converter. There is a risk of
damage to property. Do not add too much
engine oil. If there is excess engine oil, have
the engine oil level corrected by an author-
ized service center or another qualified serv-
ice center or repair shop.
Overview
The oil filler neck is located in the engine com-
partment.
Additional information:
For an overview, refer to page 343.
Online Edition for Part no. 01405A7B930 - II/23
Operating materials
Adding engine oil
1.
Opening the hood.
Opening, refer to page 345.
2.
Open the lid counterclockwise.
3.
Add engine oil.
4.
Close the lid.
Engine oil types to add
General information
The engine oil grade is critical for the service
life of the engine.
Only add with the types of engine oil which are
listed.
Safety information
NOTICE
Oil additives can damage the engine. There
is a risk of damage to property. Do not use oil
additives.
NOTICE
Incorrect engine oil can cause malfunctions
in the engine or damage it. There is a risk
of damage to property. When selecting an
engine oil, make sure that the engine oil has
the correct oil specification.
MOBILITY
349
OwnersManuals2.com
Advertisement
Table of Contents
