Table of Contents
Advertisement
MOBILITY
companying lug bolts may have to be used
as well.
4.
Hand-tighten the remaining lug bolts and
tighten all lug bolts well in a crosswise pat-
tern.
5.
Turn the jack crank handle counterclock-
wise to retract the jack and lower the vehi-
cle.
6.
Remove the jack and stow it securely.
After the wheel change
1.
Tighten the lug bolts crosswise. The tight-
ening torque is 101 lbs ft/140 Nm.
2.
Stow the faulty wheel in the cargo area, if
necessary.
3.
Check tire inflation pressure at the next op-
portunity and correct as needed.
4.
Re-initialize the flat tire monitor or reset the
Tire Pressure Monitor.
5.
Check to make sure the lug bolts are tight
with a calibrated torque wrench.
6.
Drive to the nearest authorized service cen-
ter or another qualified service center or
repair shop, then have the damaged tire
renewed.
342
Wheels and tires
Online Edition for Part no. 01405A7B930 - II/23
OwnersManuals2.com
Advertisement
Table of Contents
