Table of Contents
Advertisement
CONTROLS
Overview
1
Adjusting
2 Selecting a mirror, Automatic Curb Monitor
3 Folding in and out
Adjusting the exterior mirrors
Press the button.
The selected mirror moves along with
the button movement.
Selecting a mirror
To change over to the other mirror:
Slide the switch.
Malfunction
In case of an electrical malfunction, adjust the
mirror by pressing the edges of the mirror
glass.
Folding in and out
NOTICE
Depending on the vehicle width, the vehicle
can be damaged in car washes. There is a
risk of damage to property. Before washing,
fold in the mirrors by hand or with the button.
Press the button.
Folding is only possible up to a speed of ap-
prox. 15 mph/20 km/h.
124
Seats, mirrors and steering wheel
Online Edition for Part no. 01405A7B930 - II/23
Folding the mirrors in and out is helpful in the
following situations:
▷
In car washes.
▷
On narrow roads.
Mirrors that were folded in are folded
out automatically at a speed of approx.
25 mph/40 km/h.
Automatic heating
Both exterior mirrors are automatically heated
as needed and when the drive-ready state is
switched on.
Automatic dimming feature
The exterior mirror on the driver's side is au-
tomatically dimmed. Photocells in the interior
mirror are used to control this.
Automatic Curb Monitor
Principle
If reverse gear is engaged, the mirror glass on
the passenger's side is tilted downward. This
improves your view of the curb and other low-
lying obstacles when parking, for instance.
Activating
1.
slide the switch to the driver's side
mirror position.
2.
Engage selector lever position R.
Deactivating
Slide the switch to the front passenger's side
exterior mirror position.
Interior mirror
General information
The interior mirror is dimmed automatically.
Photocells are used for control:
OwnersManuals2.com
Advertisement
Table of Contents
