Table of Contents
Advertisement
luggage rack or trailer can limit the detec-
tion range of the camera.
Display on the control display
Toolbars
The assistance functions can be activated
manually via the toolbars on the sides of the
control display.
1.
Move the Controller to the right, if needed.
2.
With corresponding equipment:
"Camera image"
3. ▷
"Parking aid lines".
Pathway lines and turning circle lines
are displayed.
▷
"Obstacle mark.".
Depending on the equipment, the ob-
stacles detected by the Park Distance
Control are displayed by marks.
More than one assistance function can be ac-
tive at the same time.
Parking aid lines
General information
Additional assistance functions can be shown
in the camera image on the control display.
More than one assistance function can be ac-
tive at the same time.
Driver assistance systems
Online Edition for Part no. 01405A7B930 - II/23
Pathway lines
Pathway lines help you to estimate the space
required when parking and maneuvering on
level roads.
The pathway lines are continuously adjusted
to the steering movements depending on the
steering-wheel angle.
Turning circle lines
Turning circle lines can only be superimposed
on the camera image together with pathway
lines.
Turning circle lines show the course of the
smallest possible turning radius on a level
road.
Only one turning circle line is displayed after
the steering wheel is turned past a certain an-
gle.
CONTROLS
251
OwnersManuals2.com
Advertisement
Table of Contents
