Table of Contents
Advertisement
General information
Two radar sensors in the rear bumper monitor
the area behind the vehicle.
The system indicates approaching road users.
Depending on the vehicle equipment, the area
around the vehicle in front of the vehicle is
monitored as well. Two additional radar sen-
sors are located in the front bumpers.
Safety information
Warning
The system cannot serve as a substitute for
the driver's personal judgment in assessing
the traffic situation. Based on the limits of
the system, it cannot independently react
to all traffic situations. There is a risk of
accident. Adjust driving style to traffic condi-
tions. Watch the surrounding traffic situation
closely, be ready to take over steering and
braking at any time, and actively intervene
where appropriate.
Driver assistance systems
Online Edition for Part no. 01405A7B930 - II/23
Overview
Button in the vehicle
Park assistance button
Sensors
The system is controlled by the following sen-
sors:
▷
Radar sensors, side, rear.
▷
Depending on the equipment: radar sen-
sors, side, front.
Additional information:
Sensors of the vehicle, refer to page 35.
Turning on/off
Activating/deactivating the system
With the button
1.
Press the park assistance button.
2.
Tilt the Controller to the right.
3.
"Settings"
4.
"Cross traffic warning"
5.
"Cross traffic warning"
Via iDrive
1.
"CAR"
2.
"Settings"
3.
"Driver Assistance"
4.
"Parking and Maneuvering"
CONTROLS
267
OwnersManuals2.com
Advertisement
Table of Contents
