Table of Contents
Advertisement
Shift lights
Principle
Shift lights on the instrument cluster indicate
the time to upshift in order to achieve the best
possible acceleration.
General information
Depending on the equipment and national-
market version, the Shift lights are active in
the M manual mode of the Steptronic Sport
transmission and with manual transmission.
The Shift lights display is available either in the
instrument cluster or in the Head-up display.
Functional requirement
▷
Depending on the equipment, either driving
program SPORT or SPORT PLUS is acti-
vated.
▷
To display the Shift lights in the Head-up
display, the sport displays of the Head-up
display must be activated.
Turning on/turning off
Steptronic Sport transmission:
1.
If applicable, select SPORT or SPORT
PLUS driving mode.
Press Driving Dynamics Control.
2.
Activate the M manual mode of the trans-
mission.
Display
Online Edition for Part no. 01405A7B930 - II/23
Displays
Information about the driving style
▷
The current RPM is displayed in the tach-
ometer.
▷
Arrow 1: successive yellow illuminated fields
indicate an increase in the RPM.
▷
Arrow 2: successive fields illuminated or-
ange indicate an optimal shift point.
▷
Arrow 3: the field illuminates red. Do not
wait any further to shift.
When the maximum RPM is reached, the entire
display flashes red and the fuel supply is inter-
rupted in order to protect the engine.
Standby state and drive-
ready state
OFF is displayed in the instru-
ment cluster. The drivetrain is
switched off and standby state
switched on.
READY is displayed in the
instrument cluster. The Auto
Start/Stop function is ready for
automatic engine start.
Additional information:
Operating condition of the vehicle, refer to
page 39.
Engine temperature
Display
▷
Cold engine: the needle is at
the low temperature value.
Drive at moderate RPM and
vehicle speeds.
▷
Normal operating tempera-
ture: the needle is in the mid-
CONTROLS
169
OwnersManuals2.com
Advertisement
Table of Contents
