Determine The Transducer Position With A Paper Roll - Honeywell VERSAFLOW SONIC 1000/TWS 9000 Handbook

VERSAFLOW SONIC 1000/TWS 9000

3.8.10 Determine the transducer position with a paper roll

With the use of a paper (or plastic material) roll 1, the position of the transducers at the right
position can be found. The next steps need to be followed:
Step 1
• Fit the paper tightly around the pipe 2
• Make sure that both the ends of the paper overlap each other
• Then mark both radial lines of the sides of the paper roll 3
• Cut the paper to the length (C) exactly 4
Figure 3-19: Preparing the paper roll template
Step 2
• Fold the paper exactly in half 1
• Put the folded paper back and fit it tightly on the pipe 2
Figure 3-20: Fold paper and place back on pipe line
34-VF-25-07 iss.2 GLO Nov 11 US
www.process.honeywell.com
INSTALLATION
3
41