Honeywell VERSAFLOW SONIC 1000/TWS 9000 Handbook page 134

OPERATION
6
No. Function
C6 I/O HART
C6 I/O HART
C6.1 PV is
C6.2 SV is
C6.3 TV is
C6.4 4V is
C6.5 HART Units
C6._.1 Current Output X
C6._.1 Frequency Output X
C6._.1 HART Dynamic Var.
134
Settings / descriptions
Selection or display of the 4 dynamic variables (DV) for HART
®
The HART current output (terminal A basic I/Os ) always has a fixed link to
the primary variables (PV). Fixed links of the other DVs (1-3) are only
possible if additional analogue outputs (current and frequency output) are
available; if not, the measurement can be freely selected from the following
list: in Fct. A4.1 "Measurement"
_ stands for 1, 2, 3 or 4
X stands for connection terminals A...D
Current output (primary variable)
(secondary variable)
(tertiary variable)
(4th variable)
Changes units of DVs (dynamic variables) in the display
Break: return with ^ key
®
HART display: copies the settings for the display units to the settings for
DVs
Standard: factory settings for DVs
Shows the current analog measured value of the linked current output. The
measurement cannot be changed!
Shows the current analog measured value of the linked frequency output, if
present. The measurement cannot be changed!
Measurements of the dynamic variables for HART
Select:
Volume Flow / Mass Flow / Diagnosis / Velocity /
Totaliser 1 / Totaliser 2 / Totaliser 3 / Operating Hours
www.process.honeywell.com
VERSAFLOW SONIC 1000/TWS 9000
®
®
.
34-VF-25-07 iss.2 GLO Nov 11 US