Table of Contents
Advertisement
SERVICE
7
Stainless steel sensor
It is not necessary to disassemble the device completely to separate all the materials. If
complete disassembling is required, parts can be separated by using a Torx screwdriver size T8.
• Both the stainless steel fixing unit can be removed by pressing the clips on the side, move up
and slide out of the guiding plate.
• Both transducer/sensor(s) can be removed from the positioning knobs but only with force.
• Slide the transducer/sensor(s) with force out of the locking cams on the knobs.
• Remove the connection cable.
• Remove the transducer/sensor(s) and plastic parts of the position knobs.
• All stainless steel parts in/on the stainless steel housing can be separated if wanted.
Except for the riveted parts, the rail is dismounted and separated now in stainless steel /
i
plastic parts and can be recycled further.
Exploded view
Figure 7-9: Disassembled device
1 Stainless steel housing parts (top)
2 Transducers with cable
3 Positioning knobs
4 Stainless steel fixing units
5 Stainless steel housing parts (side)
166
www.process.honeywell.com
VERSAFLOW SONIC 1000/TWS 9000
34-VF-25-07 iss.2 GLO Nov 11 US
Advertisement
Table of Contents
