Table of Contents
Advertisement
INSTALLATION
3
Step 3
• Mark both ends A and B of the paper on the pipe
• Mark one side of the length C of the paper, perpendicular to both A and B
• Draw the axial lines 3 on the pipeline (from the top and bottom side of the paper roll). Use a
straight edge or long ruler
Figure 3-21: Markings on the pipeline
INFORMATION!
Markings A and B correspond with sensor rail A and B (UP and DOWN).
Mark C is the perpendicular line with respect to the lines A and B.
• After marking the lines:
i
Determine with horizontal lines A/B and the vertical line C, the position of the sensor rails
and transducers and place them accordingly
42
www.process.honeywell.com
VERSAFLOW SONIC 1000/TWS 9000
34-VF-25-07 iss.2 GLO Nov 11 US
Advertisement
Table of Contents
