Technical Data - Honeywell VERSAFLOW SONIC 1000/TWS 9000 Handbook

TECHNICAL DATA

8
8.2 Technical data
INFORMATION!
• The following data is provided for general applications. If you require data that is more
relevant to your specific application, please contact us or your local sales office.
Additional information (certificates, special tools, software,...) and complete product
•
documentation can be downloaded free of charge from the website.
Measuring system
Measuring principle
Application range
Measured value Measured value Measured value Measured value
Primary measured value
Secondary measured value
Design
The measurement system consists of a measuring sensor rail and a signal converter. It is only available
as a separate (remote) version.
Signal converter Signal converter
Signal converter Signal converter
Wall-mounted housing (W);
remote version
Field housing (F); remote version
Sensor rail(s) Sensor rail(s)
Sensor rail(s) Sensor rail(s)
Standard
Optional
Diameter ranges Diameter ranges Diameter ranges Diameter ranges
Small
Medium
Medium X - mode
Large
Signal converter Signal converter Signal converter Signal converter
Inputs/outputs
Counters
Verification and self-diagnostics
Communication interfaces
172
Ultrasonic transit time
Flow measurement of liquids
Transit time
Volume flow, mass flow, flow speed, flow direction, speed of sound,
gain, signal to noise ratio, diagnosis value, reliability of flow
measurement, quality of the acoustic signal.
Optional: thermal power, thermal energy, temperature.
TWS 9000 W (general purpose)
TWS 9000 F (option: Ex version)
Small, medium or large stainless steel version
Medium rail for X mode
All sensor rail(s) (small, medium and large) are available in XT
version (eXtended Temperature), Offshore version
DN15...100 / ½...4"
Outer diameter must be at least 20 mm / 0.79"
DN50...400 / 2...16"
DN200...1250 / 8...50"
DN200...4000 / 8...160"
Outer diameter must be smaller than 4300 mm / 169.29"
®
Current (incl. HART ), pulse, frequency and/or status output, limit
switch and/or control input (depending on the I/O version).
Two internal counters with a maximum of 8 counter places (e.g. for
counting volume and/or mass units).
Integrated verification, diagnostic functions: measuring device,
process, measured values, device configuration, empty pipe
detection, bar graph etc.
®
HART 7, Modbus RS485 (option).
www.process.honeywell.com
VERSAFLOW SONIC 1000/TWS 9000
34-VF-25-07 iss.2 GLO Nov 11 US