Table of Contents
Advertisement
VERSAFLOW SONIC 1000/TWS 9000
6.1 Display and operating elements
Figure 6-1: Display and operating elements (Example: flow indication with 2 measuring values)
1 Indicates a possible status message in the status list
2 Tag number (is only indicated if this number was entered previously by the operator)
3 Indicates when a key has been pressed
4 1st measured variable in large representation
5 Bar graph indication
6 Operating keys, optical and mechanical (see table below for function and representation in text)
7 Interface to the GDC bus (not present in all signal converter versions)
8 Infrared sensor (not present in all signal converter versions)
INFORMATION!
The switching point for the 4 optical keys is located directly in front of the glass. It is
•
recommended to activate the keys at right angles to the front. Touching them from the side
can cause incorrect operation.
After 5 minutes of inactivity, there is an automatic return to measuring mode. Previously
•
changed data is not saved.
34-VF-25-07 iss.2 GLO Nov 11 US
www.process.honeywell.com
OPERATION
6
101
Advertisement
Table of Contents
