Honeywell VERSAFLOW SONIC 1000/TWS 9000 Handbook page 174

TECHNICAL DATA
8
Operating conditions
Temperature Temperature
Temperature Temperature
Process temperature
Ambient temperature
Protect the signal converter from external heat sources such as direct sunlight, as higher temperatures
reduce the life cycle of all electronic components.
Storage temperature
Pipe specifications Pipe specifications Pipe specifications Pipe specifications
Material
Pipe wall thickness
Liner thickness
Media properties Media properties Media properties Media properties
Physical condition
Viscosity
Permissible gas content (volume) ≤ 2%
Permissible solid content
(volume)
Flow range
Installation conditions
Installation
Measurement configuration
Inlet run
Outlet run
Dimensions and weights
174
Standard version: -40...+120°C / -40...+248°F
XT version: -40...+200°C / -40...+392°F
Sensor: -40...+70°C / -40...+158°F
Standard (die-cast aluminium converter housing):
-40...+65°C / -40...+149°F
Standard (polyamide converter housing):
-40...+65°C / -40...+149°F
Option (die-cast stainless steel converter housing):
-40...+60°C / -40...+140°F
Ambient temperatures below -25°C / -13°F may affect the readability
of the display.
-50...+70°C / -58...+158°F
Metal, plastic, ceramic, asbestos cement, internal / external coated
pipes (coatings and liners fully bonded to pipe wall).
< 200 mm / 7.87"
< 20 mm / 0.79"
Liquid, single phase (well mixed, rather clean).
< 200 cSt (general guideline)
Maximal measurable viscosity depends on density and pipe diameter
For higher viscosities please contact your local representative.
≤ 5%
0.1...20 m/s (turn down 200:1)
For detailed information refer to
on page 24.
Single path, single pipe or dual-path/dual-pipe
≥ 10 DN straight length
≥ 5 DN straight length
For detailed information refer to
183.
www.process.honeywell.com
VERSAFLOW SONIC 1000/TWS 9000
Installation and safety instructions
Dimensions and weight
34-VF-25-07 iss.2 GLO Nov 11 US
on page