Configuring Radius Server Settings; Figure 51 Port Authentication: Radius; Table 32 Port Authentication: Radius - ZyXEL Communications ZyXEL Dimension GS-4012F User Manual

Table 31 Port Authentication: 802.1x (continued)
LABEL
Reauthentication
Timer
Apply
Cancel

16.2.2 Configuring RADIUS Server Settings

From the Port Authentication screen, click RADIUS to display the configuration screen as
shown.

Figure 51 Port Authentication: RADIUS

The following table describes the labels in this screen.

Table 32 Port Authentication: RADIUS

LABEL
Authentication Server
IP Address
UDP Port
Shared Secret
Apply
Cancel
Chapter 16 Port Authentication
DESCRIPTION
Specify how often a client has to re-enter his or her username and password to stay
connected to the port.
Click Apply to save your changes back to the switch.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Enter the IP address of the external RADIUS server in dotted decimal notation.
The default port of the RADIUS server for authentication is 1812. You need not
change this value unless your network administrator instructs you to do so.
Specify a password (up to 32 alphanumeric characters) as the key to be shared
between the external RADIUS server and the switch. This key is not sent over the
network. This key must be the same on the external RADIUS server and the switch.
Click Apply to save your changes back to the switch.
Click Cancel to begin configuring this screen afresh.
GS-4012F/4024 User's Guide
117